What Have You Done To Your 2nd Gen Tacoma Today?

New reverse LEDs

 

Oil and filter change, engine air filter, cabin air filter, spark plugs, PCV valve, drain and fill front and rear diffs and transfer case, L/F wheel bearing, R/F caliper, new rotors and brake pads with new hardware, grease front and rear driveshaft's, spray all the suspension bolts with PB Blaster ahead of installing my lift.
Found out that my power steering return line is leaking and my rotor dust shields are rusted. Need to fix that before the lift.

forgot to add: adjusted rear brakes and replaced the serpentine belt

I'll probably fix the other stuff at the same time I do the lift. Still need to replace my R/F bearing.

 

Washed and ready to be garaged until further notice.

 

Holy cow. Did you need a few bumps of cocaine to get through all that in a day?

 

Got my truck back from getting my knock sensor wires replaced. Also had them change the spark plugs and oil change. And Finally got around to installing seat spacers from olecott and the uni filter mod. Man these spacers are great quality. They make such a difference!

 

Installed AVS in channel window rain visor things, fixed a squeaky window motor and cleaned all the windows

 

How do the Headstrong coils ride on the road? I have 887s right now and they ride pretty dang stiff on 5100s lowest clip. I also have a bumper like you on the front. Do they jar over pot holes or are they pretty good at taking bumps like the oem stuff?

 

Took about 6 hours including a break for lunch. Would've been quicker but I have to be careful with my back. I know I'll feel it tomorrow.

 

$13 Heininger COMMUTEMATE Cell Cup AUTO Organizer, Black

https://www.amazon.com/gp/product/B001RUW4GU/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

 

You must be short because the roof is close to my head enough, now you add spacers???

 

Got something in the mail!



Thanks TTC and Thank you Mr. Chad!

 

,

 

Was going to start on my CV axle swap, needle bearing for clam shell bearing swap and front lift spacer install but being that the #campfire is threatening to make me evacuate.... I decided that it probably wasn't the best time to tear apart the front end of the taco.... so... maybe next weekend

 

The seats sit better for my back.
I you can afford the room you may appreciate it.

 

Made some new redwood planters then spent what as left of the evening after walking the dog on assorted wiring in the center console. Mainly remaking the seat heater harnesses which come with ~75% more wire than needed and butt ugly wire loom but also some on the compressor relay. As usual by the time I finished I had thought of better ways to do it. OCD at odds with LAF, beer won.

 

Pushed out a bunch of the large dents in the body. Mostly the bed panel. The fender flares were damaged in the roll so they got removed all around. Dont mind the way it looks. Except they did leave some light lines where they once were. My next step will be too get rid of the small amounts of rust on the exposed metal parts. Then some primer and paint. Gotta fill those holes too. Any Ideas? Oh and heres whats shes looking like wish I had thought of before pics...

 

Tonight on my way home, when I turned the lights on my back lights in my tach didn't work.

 

Picked up the 2009 Venza from sister, nice sister to give big brother a car to haul 3 teenage grandkids living with around. this will slow the mileage build up on the Tacoma and hopefully get better mileage. Need a good detailing on the inside and the engine is dirty. Barcelona Red with Ivory interior all the bells and whistles. Nav System JBL, Nice car will need some mechanical work in spring, will know more after going through maintenance records. Sister got new Highlander with everything and was so intimidated by it did't drive for week finally read all the manuals and now is in love with it. So now we car #3 again. A project type car for the Grandsons and if they are good it will their car in the spring. They have come up with Insurance and gas money and grades.

 

Where did you get the grill?

 

Wiper blades are not a mod but I like your enthusiasm