What have you done to your Tacoma today? 1st Gen Edition

If anyone here has a 2001 v6 tacoma without abs and has the J shift transfer case. Could you either send me the vin number or get the the part number off the engine wire harness (its on the harness right behind the ECU connectors). I picked up a j shift from an 04 i want to put in my 01. i'd like to just plug it all in and go with a used harness or something.

 

If I wanted to find a specific Tacoma with a specific trim level or option, I would look for it on Copart and get the VIN from the pictures.

 

@Empty_Lord

Here’s one. https://www.copart.com/lot/29584638

Poor truck. Looks like the wheel popped off.

 

Well after repainting the bumper we installed.it. the grill wouldnt fit so im making a grill. Front bumper installed and striped.

 

Looks bad to the bone man. I bet it's a blast to drive!

 

Halls ass now bigger turbo, intercooler injectors, exhaust and ecu

 

That has ABS and the wrong engine

 

Your buffers on the ARB are on wrong

 

Swap those nerf bars out for some sliders! To me sliders are more important than bumpers.

 

Nice catch. Yeah they appear to be reversed side to side as well as upside down. Gave me a chuckle lol. Good looking bull bar (though it'll look better with those rubber bumper thingies corrected )

 

I found one. Going to see if the parts available

 

Where?

 

Car gurus. Just wanted the vin. I’ll run it and see if the engine harness is still available. Truck is a v6 auto 4x4 with the j shift and it’s a 01. Everything I was looking for

 

Did some things today: painted the grill, changed some bulbs, replaced my headlights.. and appearly killed my battery from the 3 mins of checking my lights...
before:

After:

 

Thanks for that, is this going to be a PITA to move?

 

Well, this sucks...got my fender liner out to install the snorkel today, only to realize that my truck is missing part of the OEM air intake system that the snorkel is supposed to attach to.

I'm missing #9 and #10...the intake duct and air duct

 

Nice job!

 

Has it ever been hit on that side. Fender still has the VIN decal

 

No records of any accidents but I'll check for the decal...inside is covered in dirt so it's hard to tell.

 

Thanks man! I think it came out great. Think I am going to drill out holes for my Hellas once I get the time and correct brackets. Like this but in the grille: