Maxtrac Spindle Lift for 2nd Gen Prerunners

Where did you find a half inch block?

 

Wheelers offroad. Came with a longer center pin as well. I would get their icon sway bar relocate bracket too (it's just a spacer that brings it down) IF you plan to still run the sway bar. I left mine on because I'm 99% street

 

You're the best!

 

Anytime! They have another sway bar relocate bracket for a little but less but he icon one is already colored black and was a perect fit.

Also, just save for the uppers!! You'll be happy and the ball joint won't be at such an extreme angle

 

By the way, how far out is the slip yoke now with the new set up?

 

Havnt checked on that but it'll probably take a .75" spacer to get it back right

 

Hey chadspride, What are you going to do with the rear? SUA or Link?

 

Shoot, linked would be the way I would go. But that's many many years out. Still need to pay this thing off

​

 

How much the CB should be drop it with 4" lift? 1/4, 1/2, 3/4, 1 in?

 

​

Think I'm running half inch

 

... And killed the vibration? I put half an inch yesterday but still got it.

 

It's still there on take off. When are you getting a vibe?

 

Same as you! Between 5mph and 10mph maybe.

 

5" - 3"

 

Have you checked your u joints? I never had vibes until I did my lift, had cb bearing drop tried different amounts, also had DS spacer and still had vibes. I replaced all the joints and no vibes. The increased angle makes bad u joints show up real fast.

 

They look fine! Weirdly enough I couldn't see any way to grease them because they have no zerks. Another Toyota smart engineering like the sealed Tranny without dipstick.

 

Good looking truck.
What did you add to get that xtra inch up front?

 

Thanks, man! I had a set of a 2018 TRD struts with only 200 miles on them hidden in the garage plus a Headstrong 1/4 plate. So I should be now between 5" or 5" 1/4 now. I'm planning to buy Dakars for the rear and use them with maybe a small block to go over 3"

 

Wheres the best deal on a maxtrac spindle lift for 2wd prerunner?

 

@HeadStrong Off-Road - ask for the ChadsPride kit