I sure hope these tires fit..

Picked up some new shoes this morning. Method 701’s wrapped with 305 70r 16 KO2’s. Getting them installed next week. I am willing to lift, cut, and chop whatever is required to get these bad boys rolling lol.

 

Yep those are fat they will require all the things.

 

I'm running 305/65/17 with 3" lift, fender flare trimming and SPC UCA's and 17x8.5 wheels with -10 offset. I get a little bit of rubbing on the fender flare still at full turn backing up at odd angles but it doesn't happen all the time so it's not a big deal.

 

I just checked my truck again and the slight rubbing I have is actually on the cab mount, not the fender flare like I thought. So if you're getting the cmc done I think you should be ok. But it might depend on the tire position based on your alignment. Are you getting adjustable upper control arms done as well?

 

It's going to look great!

Getting out of 265's and into 305's is my future plan one day

 

That’s good to hear. Yes, I bought Total Chaos UCAs which will be installed next week along with the new suspension. with the CMC, 3” lift, I think I should be ok.

 

You'll probably have to hammer your pinch weld too

https://www.tacomaworld.com/threads...mmer-lets-discuss.425850/page-3#post-13124934

 

oh boy

 

Wouldn't it be better to do the research first regarding tire size and lift/modifications? This way you minimize any surprises and potential headaches.....

 

Holy moly!

 

Got some 315s on my 2” lift. Rub off-road for sure but no rub with on road driving.

 

https://media.giphy.com/media/kaq6GnxDlJaBq/giphy.gif

 

My face too

 

Why not just go to 315/75/16 same amount of work required...



They're feeling small these days though

 

Embrace the "Six P's"...

Prior Planning Prevents Piss Poor Performance