FN Fx Pro wheels show thread and info all models

I personally think the bronze and matte bronze wheels were made for blue vehicles. I say go for it! Maybe with the black center cap.

 

@Hextall is correct. These wheels are not made to use OEM lug nuts with. This is per Dustin @FNwheels. Enjoy your new wheels and post some pics when you can!

 

Has anyone looked into putting a different center cap on these? Something that's not flat, I feel like the Sema style center cap that has some depth to it adds a nice touch and takes away from the concave look.

 

I run the FN Fx Pro wheels in matte bronze and am planning to move up to 285/70/17s but I have a question that I cant find an answer to.... can I run these wheels with out spacers? If not, what is the minimum spacer width required?

 

These are 0 offset, whereas stock are +30, so having these wheels is already like having a 1.2” spacer behind stock wheel. I don’t think rubbing uca should be a problem with 285s.

 

This is exactly what I wanted to hear! My tires already align with the fenders and I would prefer them not to extrude anymore.

 

As someone who previously ran 285/70R17 Cooper ST Maxx on these wheels, I can attest to the fact that you will not rub the UCA. However, you may need to plan on a CMC if you wheel it much.

 

I picked up a set of these directly from Dustin a few days ago, and I have only good things to say... great customer service, advice, and communication, and he happily answered all my newbie questions! These are 16's, using the stock tires that came with my Offroad.

 

Congrats, You may be the very first person on the site to post a pic of these mounted in a 16!

 

Was it only available in 17’s before?

 

yes until just recently. Some may have gotten theirs before him but they haven't put up pics yet.

 

Thanks!

I just got 285/70R17 Cooper ST Maxx on the FN Pro Matte Bronze and have no UCA rubbing and no need for spacers! They fit great and look mean!

Thanks for your input!

 

Sweet! Post some pics when you get the chance. And have a Happy Thanksgiving!!

 

Just picked these up locally in Canada, they didn't come with lugnuts.

Wondering what options are out there, or the specific brand FN is using in the shipments to other customers (see truncated quote below)

Thanks

S

 

Got my 16x8 light matte gunmetal Fn Fx Pro wheels on with 285/75/16 tires. They look awesome in every way. I have King OEM suspension with Deaver leafs that add about 2.2 inches in the back and 2.2 inches in front. The rear wheels have no clearance problems, the front I got aligned to +3.0 caster and they don't rub at all in normal driving or full compression, but do just a little when turned hard and fully compressed on the cab mount.

 

Are you running stock UCA's?

 

No, total chaos

 

2019 Cement Gray TRD Off Road

Dark High Gloss Gunmetal

275/70/17 BF Goodrich KO2

They slightly rub on full turn going up a steep embankment other than that they ride well

 

(edit) nevermind, read the whole thread - post #101-102 may have answered my question)

I have these CECO's locally
https://tacomatownonline.com/collec...sories/products/ceco-tuner-lug-nut-kit-tacoma

Anyone use these? or what other options are people using?

Thanks for any advice

 

Here are my 17x8 FX PRO wheels in gmg with zero offset, The tires are 265 70 17 Nitto Ridge Graplers with stock suspension