TORSPD: NEVR

True. I used no filler and will likely grind smooth but you should still see the logo in it.

 

With no filler, it will be fine.

 

Moving along as uzsh.





Need to merge the wastegate into the down-pipe, and call it good.

 

No screamer through the hood?

 

Sounding like a V8, is enough as is.

 

#nevrenough

 

Is that a piece of donor stainless on "THE NEVR" build? If so I feel honored!

 

Not sure actually. There was a left over piece that you had acclimated your self on. Lucario Runner took that one home. Maybe you left an additional piece left over, of yours? Not too sure where the shiny piece came from. If it was left over by you, or from when @mnovak had his muffler/catback fab'd up.

Aside from that, I need to finish welding the turbine outlet flange. It was too cold to finish it up last night, and get it started. I want to make a video to complement @loginfailed 's video. Then a cruising video, once the wastegate it tied in.

 

If you want, I'll help you film when your ready. Let me know when you're to that point.

 

Ah, I only left that one piece or tubing. I did leave you some welding rod and a Tungsten.

 

All you left me was some BBQ sauce...

 

And less metal in your intake!

 

And here I was thinking that you forgot the rod. I was going to give it back during TexFest in March.

Sound good to me.

 

Nah, call it a rental fee.

 

Ran out of argon while finishing the last weld on the turbine an outlet flange. I believe it to be an omen to enjoy the weekend.

 

Now that this portion is done, I found that I have an exhaust hanger which needs repairing and the axle back portion also needs repairing because the stress of that hanger breaking put undue stress on it and cracked the aluminum. Once I get a new tank gas next week, then I will be able to remedy those as well as finish the charge pipe routing.

 

We are going to need a heatshield!

 

Naked for the photo shoot.

 

Heatshield is on, but will very likely need to order another 50'of wrap. Already have 50'.