Northern Virginia Roll Call

Where you out playing around at?

 

Do your 4.88s pair well with your 315’s? Acceleration wise?

 

I replaced my oem with energy suspension poly bushings when i put in the Allpro leafs?

 

Any of u gamers out there, they are doing a Black Friday ps4 1tb bundle with remote control and Spider-Man for $199. Thought I’d pass along as I just picked one up for my son

 

By our shop in dulles

 

Maybe spray some lube one them and see if it goes away. If it does maybe they need some grease

 

The acceleration feels good. I can definitely tell that I gained back a lot of the low end torque that I lost when I went up to the 315s with the stock gears. If I'm cruising at 50-55 in 5th (about 2000 RPM), I still need to downshift to 4th to bring the engine upto around 2500 to maintain speed up a hill, but according to my Ultragauge the engine load is a lot less. With the stock gears and 315s, my engine load was at 90+% trying to maintain highway speeds. Now, I'm back down around 60-70% engine load cruising on flat road.

Who is they?

 

Walmart target GameStop. Amazon later this week

 

Lol. You know me, I'm always throwing around ideas in my head. Just been putting it off because I don't even have any rubbing issues at all. But if I do go back to 305/70/18 tires next time I need tires, I will rub a little again.

 

I picked up the ps vr this morning from target. It was a hundred off. Finished setting it up a little while ago and about ready to give it a go. Gonna try the robot game it came with first then gran turismo

 

This bolt right here (highlighted one) should be torqued with the weight of the truck on it. Put it in finger tight during leaf install, then when the truck is back on all 4s bounce up and down on the rear bumper. THEN torque that bolt. What you're hearing may be the factory bushing binding in the shackle

 

Holy shit I have an interior again.

 

Thanks i will try that....

 

Woops again

 

Finished control arm minus ball joint, weld cleanup and paint.

 

@boogie3478 it makes crunchy plastic noises still, any ideas?

https://youtu.be/JwRsaBxkIZM

 

Lol I have no idea what's causing that. Last time I heard it doing that you were also coming down a hill though ...

 

Looks fantastic man! Goes perfectly with your others!

 

Jimmy has been,hooking me up lately!