Receiver Hitch Pin

I just bought a hitch receiver cover and a locking hitch pin that is supposed to fit a 2" receiver...but it doesn't. Am I missing something here?

 

Which pin did you buy???

 

Apparently you are missing the correct part.

But more details are required........

 

Curt Hitch Lock

 

Too big, too small, too much rust?!?

 

Should be a 3/4 inch pin that fits in the reciever.

 

When I got my Tacoma I had to replace my lock because the Tacoma’s recover is double layered and therefore my lock was too short.

 

Ive had an issue with that pin being too short and I couldn't get the lock on it. It came off my buddies jeep and it worked fine on there

 

It's a new touch and the pin fits through the receiver, but it doesn't seem to fit all the through enough to get the locking end on.

 

That’s exactly the problem I had with my orginal lock that was a round pin with round lock. Had to get one simular to this: https://www.campingworld.com/hitch-lock?rrec=true

 

This one fits, I own it. You can buy a set with a boat trailer hitch lock pin as well.

https://m.youtube.com/watch?v=A9_UPkg9GZ4

 

That could be a problem. I bought a simple one with a cauter pin from harbor freight for 3.99. Works great

 

I have one as well. Picked it up at an O'reillys.

 

I always take mine out I live in the middle of nowhere so it's not the theft issue it's just a shin banger! Even when I'm camping I take it out and put it in the truck.

 

I had the same problem, bought one, too short, returned it, traded one longer no problems.

I keep the hitch installed, folks that want to tailgate on my bumper will have a major gash
if they get too close to that triple ball.

 

I need to get one that fits. I have to use the assistance of a C clamp to take my current security one on and off. It fit my 2nd gen but is a little too tight for 3rd gen. I’ve had it over 4 years.

 

I had the exact same problem and OR Warehouse were baffled by it. I ended up buying the next size up.

 

What I have.

 

I have Master Lock No.

$35 1469DAT Master Lock Silver and Red Receiver Lock, Stainless Steel Barbell™ Hitch Pin Lock, Fits 5/8 in. Receivers, Weather Resistant Automotive Receiver Lock, 1469DAT

1469DAT. It is 3.5in, and it worked. i also had bough the shorter one at first.

 

This one fits and looks fantastic. Class V