1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

dpele's 2010 Tacoma DCSB TRD Off-Road

Discussion in '2nd Gen. Builds (2005-2015)' started by dpele, Oct 3, 2017.

  1. Oct 3, 2017 at 11:30 AM
    #1
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Updated | March 7, 2023


    2010 Toyota Tacoma
    V6
    Double Cab | Short Box
    TRD Off-Road
    Silver Streak Mica



    Current:
    138,XXX miles | 222,XXX kms​


    Follow me on Instagram!




    [​IMG]
    Interior:

    Red LED Map Lights LINK

    White LED Dome Light LINK

    Salex | Center Console Organizer LINK

    COCOON | Grid-It Organizer LINK

    IronSeals | Seat Molle Organizer LINK

    Cell Phone Magnetic Car Mount LINK

    Mood Lighting LINK

    Focal Access | Front Speakers and Tweeters LINK

    Focal Access | Rear Speakers LINK

    JL Stealthbox 2x 10" | Subwoofers LINK

    Amp 1 (details to come)

    Amp 2 (details to come)

    Radio Component (details to come)

    Comms:

    Baofeng 888s | 2-Way Radio (x2) LINK

    Baofeng UV-5R | 2-Way Radio (x2) LINK

    Baofeng | 7.4v 3800mah Li-ion Extended Battery LINK

    Tangxi | Radio USB Charger (9-10.8V) LINK

    TYT | Radio Remote Speaker Mic LINK

    Bingfu | Magnetic Base Antenna LINK

    XRDS -RF | 10ft SMA Male to SMA Female Connector Coax Cable LINK


    Tools / Recovery:
    Tire Deflator Pressure Gauge LINK

    RFX | Tire Deflator Pressure Gauge LINK

    RFX | 5.65 CFM, 150 PSI Portable Compressor LINK

    Smittybilt | Receiver Hitch D-Ring LINK

    Plano | 108-Quart Containers LINK

    FieryRed | Traction Boards LINK

    ARB | Snatch Strap LINK

    ARB | Tire Repair Kit LINK

    Maximum | Round Point D-Grip Shovel LINK

    Fiskars | 28in Chopping Axe LINK

    Rugged Tools | Tool Roll Bag LINK

    Touroam | First Aid Kit (Molle) LINK
    Suspension:

    Elka | 2.0 IFP FRONT & REAR SHOCKS KIT (2 in. to 3 in. lift) LINK

    Old Man Emu | Dakar EL095R Rear Leaf Springs LINK

    SPC | Upper Control Arms LINK

    Timbren | Active Off-Road Bumpstops (rear) LINK

    Exterior:

    Trail Gear | Rock Slider Kit 78" LINK

    Magnaflow | Exhaust

    Bullet Proof Fabrication | Raptor Style Mesh and Lettering “TACOMA” LINK

    Tinted Windows

    Toyota | D-Rings in front of Bed

    DYI Splash Guards LINK

    ROKBLOKZ | Mud Flaps (Over-Sized Tires) LINK

    Electrical:

    Northstar | AMG 27F Battery

    Offroad Town | 8 Gang Switch Panel LINK

    Heart Horse | Positive/Negative Bus Terminals LINK

    Lighting:

    Cali Raised LED | 32" Stealth Led Bar Mounts with 5D Optic OSRAM Combo Bar LINK

    Lightronic | 4pcs 8 Inch Amber LED Light Bar Cover LINK

    Diode Dynamics | Sport Selective Yellow SAE/DOT Fog LINK

    LED Reverse Light Bulbs LINK

    Auxbeam | W Series H4 Headlight Bulbs LINK

    "Raptor" Lights LINK

    Box Lights LINK

    Rock Lights LINK

    Scene Lights LINK

    3rd Brake Light LINK

    Kawell | Ditch Lights LINK

    Summit Expedition Trucks (SET) | Ditch Light Brackets (aluminum)​

    Wheels & Tires:

    Summer:

    Method Race Wheels
    301 | The Standard | Matte Black
    17 x 9

    Goodyear | Wrangler Duratrac
    LT 285 | 70 | R17​

    Winter:
    Toyota TRD Off-Road Wheels
    Painted Black
    16 x 7

    Nokian | HAKKAPELIITTA LT3 Studded
    LT 285 | 75 | R16​


    Roof Top Tent:










    tacoma12.jpg

    tacoma7.jpg

    tacoma6.jpg

    tacoma14.jpg

    tacoma16.jpg

    tacoma23.jpg

    A42F6A08-560B-44FD-95FD-E5B8CE12BAB7.jpg

    First Picture:
    (June 21, 2014)
    tacoma.jpg
     
    Last edited: Sep 26, 2023
  2. Oct 3, 2017 at 11:36 AM
    #2
    Mr. Projekt

    Mr. Projekt Well-Known Member

    Joined:
    Oct 23, 2016
    Member:
    #200511
    Messages:
    6,628
    Gender:
    Male
    First Name:
    Caleb
    Harpers Ferry, WV
    Vehicle:
    2021 DCLB TRD-OR 4x4 Army Green
    looks good....



    could use a little bit of a description though :)
     
  3. Oct 3, 2017 at 11:37 AM
    #3
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Just started it... give it some time haha
     
  4. Nov 20, 2018 at 7:35 AM
    #4
    Athlaos

    Athlaos Destruction Mode

    Joined:
    Nov 24, 2010
    Member:
    #46672
    Messages:
    2,583
    Gender:
    Male
    First Name:
    Leigh
    Edmonton
    Vehicle:
    2011 SR5 Manual TRD SC 1.87" pulley
    A flux retro-capacitance encabulator
    Nice truck mang! I like the silver, obviously.
     
    dpele[OP] likes this.
  5. Nov 20, 2018 at 7:37 AM
    #5
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Thanks! Love your colour too haha
    I'd love to join the supercharged group one day!
     
    Athlaos[QUOTED] likes this.
  6. Nov 20, 2018 at 7:38 AM
    #6
    Athlaos

    Athlaos Destruction Mode

    Joined:
    Nov 24, 2010
    Member:
    #46672
    Messages:
    2,583
    Gender:
    Male
    First Name:
    Leigh
    Edmonton
    Vehicle:
    2011 SR5 Manual TRD SC 1.87" pulley
    A flux retro-capacitance encabulator
    I'd love to help install that!
     
  7. Jul 3, 2019 at 2:10 PM
    #7
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Installed some box lights with a custom switch.
    IMG_E4378.jpg

    IMG_4369.jpg
     
    anonymouse and Athlaos like this.
  8. Sep 10, 2019 at 7:57 AM
    #8
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Painted some rust on the skid plate!

    IMG_5158.jpg
    IMG_5265.jpg
     
  9. Oct 22, 2019 at 1:37 PM
    #9
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Installed new OME Dakar EL095R leaf pack. I always had a 2" block and wanted to upgrade to something useful. One day I broke a leaf so it was a perfect time to upgrade!
    Installation obviously didn't go as planned... rusty bolts and cutting Ubolts. The "Toyota expert" shop I bought everything at also gave me the wrong new Ubolts... so I had to run around town on a Sunday late afternoon to find some that would fit before the stores closed. Needed to get to work on Monday. Ha!

    Now I just need to install my Trim Packer Kit.


    Before (top) / After (bottom):
    WGAP2770.jpg


    Before (left) / After (right):
    CYTU9672.jpg


    New and old:
    (you can see my crappy blocks at the top of the picture and the wrong round top Ubolts)
    IMG_5707.jpg


    How it currently sits:
    IMG_5718.jpg
     
  10. Nov 18, 2019 at 2:35 PM
    #10
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Cleaned up and refinished my Caliraised light bar that's hidden in my bumper.
    I also upgraded the tiny useless washers they provided. The bar kept rotating upwards and pointing to the stars.

    Light bar before cleaning:
    IMG_5809.jpg

    Light bar after cleaning:
    IMG_5815.jpg

    Original washer:
    IMG_5755.jpg

    New washer:
    IMG_5938.jpg
     
  11. Dec 19, 2019 at 2:35 PM
    #11
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
  12. Feb 7, 2020 at 9:38 AM
    #12
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Hard to fit everything in a 5' box when going skiing in the mountains with 4 people in a taco.
    So I built a little rack out of wood to but stuff on. It has a bunch of tie-down points.

    IMG_6411.jpg

    IMG_6412.jpg
     
  13. Feb 7, 2020 at 9:39 AM
    #13
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Re-installed my Rokblokz mud flaps after ripping them off...
    These flaps are great but they screw into the factory plugs. Makes a very easy install but not any stronger.
    So I bolted the :censored: straight through with SS bolts.


    IMG_6416.jpg


    You can see the 3 new SS bolts and the factory plug at the top.
    IMG_6417.jpg


    Since I lost the spacers after it ripped off, I 3D printed some new ones out of PETG.
    Right: Rokblokz
    Left: 3D print
    IMG_6414.jpg
     
    stuckprerunner likes this.
  14. Feb 7, 2020 at 9:46 AM
    #14
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Started my lighting project!

    Amazon / Auxbeam 8 gang switch panel system.
    IMG_6371.jpg


    Decent quality! Hopefully it holds up.
    IMG_6372.jpg


    Building my own Aux panel. Design almost complete!
    IMG_6415.jpg


    More to come!
     
  15. Mar 5, 2020 at 3:26 PM
    #15
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Finished up the AUX Electrical Panel!
    I decided to fab up a panel to place everything on since having a manual, there is nowhere to use the included mount.

    Here is the panel unpainted:
    MQVR6713.jpg

    IMG_6467.jpg



    Here is everything installed in the engine bay. I added 2 bus terminals that are wired in to the 60A breaker for my other accessories that I won't be running on my Switch Board. These include bed lights (switch in box), other light bar (hidden switch by shifter), etc.

    IMG_6584.jpg

    IMG_6585.jpg

    IMG_6586.jpg



    Here is everything installed inside the truck.
    I bolted the Switch Board to the headliner. I ran the 2 wires through the pillar down into the engine bay. 1 wire is for running the Switch Board, the other wire is for dimming the Switch Board. The dimmer is a momentary push button. The mount that the 8 gang Switch Board attaches to was included in the package. But I did make the mount for the push button.

    IMG_6536.jpg

    IMG_6535.jpg

    IMG_6534.jpg



    Here is the Switch Board when the ignition is on. Keep in mind I don't have any of the sticker/labels on, so the lights won't be as bright. There are 5 brightness levels.

    Full brightness:
    IMG_6588.jpg

    Lowest brightness:
    IMG_6589.jpg



    I needed to buy/add some items that weren't included in the AUX controller package. I can't complain with the price of the controller.

    Here are the items I added/needed:
    - momentary push button
    - 18 AWG wire
    - shrink tubes
    - shelf-soldering shrink tubes
    - terminal connectors

    Overall I am very satisfied with the product. The instructions that came with the package is useless, therefore you need to have some slight knowledge in automotive wiring. I am a rookie at this and I did just fine. The price is much cheaper than something like Switch-Pros or sPOD. Yes this system is not as fancy but it works for me.

    I can't wait to wire up some lights and accessories to this system!
     
    Last edited: Mar 6, 2020
  16. Mar 6, 2020 at 5:49 PM
    #16
    Gruber1922

    Gruber1922 Well-Known Member

    Joined:
    Mar 31, 2019
    Member:
    #288634
    Messages:
    1,301
    Gender:
    Male
    Tacoma, WA
    Vehicle:
    2015 Tacoma Sport
    Just installed mine a few weeks ago. How did you wire up the momentary on switch? I was thinking add a fuse
     
    dpele[QUOTED][OP] likes this.
  17. Mar 6, 2020 at 10:26 PM
    #17
    Matmo215

    Matmo215 Well-Known Member

    Joined:
    Sep 15, 2016
    Member:
    #197333
    Messages:
    7,646
    Gender:
    Male
    First Name:
    Matthew
    Waco, TX
    Vehicle:
    2015 Sport DCSB
    Let me know how it works out for you. I’ve been really wanting to get one.
     
    dpele[QUOTED][OP] likes this.
  18. Mar 9, 2020 at 7:33 AM
    #18
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Not sure if you are familiar with the setup yet, but the one "plug-in" comes with a red and a white wire.
    Red wire (power up the panel) I used a fuse tap so the switches can only be used when the ignition is on. You can also connect this directly to the battery but the panel will stay on.
    White wire (dimmer) I spliced it to a negative (black wire) to the one of the push button terminals. Red wire from the other push button terminal to the battery. So when I push the button, it makes a connection and dims the switches. Does that make sense? lol
     
  19. Mar 9, 2020 at 7:35 AM
    #19
    dpele

    dpele [OP] Pele Prints Vendor

    Joined:
    Apr 13, 2016
    Member:
    #184159
    Messages:
    954
    Gender:
    Male
    First Name:
    Dan
    Edmonton, Alberta
    Vehicle:
    2010 Tacoma DCSB
    Elka 2.0 w/ OME Dakars, 285/70/R17 Duratracs, & more!
    Will do! So far everything is great with the panel and electrical.
    I just ordered my lights to wire up to this thing. I will test run everything but it will be a while before the lights are actually connected.
     
  20. Mar 9, 2020 at 8:12 AM
    #20
    Gruber1922

    Gruber1922 Well-Known Member

    Joined:
    Mar 31, 2019
    Member:
    #288634
    Messages:
    1,301
    Gender:
    Male
    Tacoma, WA
    Vehicle:
    2015 Tacoma Sport
    I used a fuse tap with the ac fuse so it only comes on with the ignition. Just trying to figure out how to wire true white, I bought a temporary on switch as well. Which negative wire did you use?
     

Products Discussed in

To Top