New full front bumper with winch..... Suspension upgrade?

Hello compatriots!

I will be pickup up a ARC-1 full front bumper/X20 winch, set up this december. Now i don't plan on doing in rock climbing, but i do know i will need to beef up the front suspension to level her out again. any recommendations on a kit or set up that can give a small lift (2-3???) without going full billet and hard core?

 

I have RCI skids and Mobtown sliders. Maybe 200 lbs of extra sprung weight on the front suspension. The stock setup drooped 3/4”. Bilstein 6112s got rid of the droop and raised the front another 1.25” on the 4/5 setting.

My supposition is you can use standard 6112s with a bumper/winch or skids/sliders but if you run both you need to step up to 650 or 700 eibach springs.

 

Budget?

 

id say 1-2k.......

maybe a PTR13-35120 kit?

 

was checking some of these out

https://bilsteinlifts.com/shop/toyo...ith-eibach-coils-for-2016-2019-toyota-tacoma/

https://bilsteinlifts.com/shop/toyo...1-rear-5160-lift-kit-2016-2017-toyota-tacoma/

https://www.rogue-offroad.com/ProductDetails.asp?ProductCode=TacoStage3&CartID=1

they seem to be around what im thinking i will need.

 

Ome 886 coils with nitrochargers or coilovers with 700lb springs.

 

which springs would you recommend?

 

Old man emu 886 springs with the nitrocharger shocks is what I have with full armor an have about 2.5 in lift up front. The 886 coil is made for the heavy weight so it wont sag. Marie @HeadStrong Off-Road will be able help ya out great vendor better customer service.

 

From what I’m reading above I should have no problem adding a hidden winch mount and smittybilt winch about 100lbs on my 6112’s???