What Have You Done To Your 3rd Gen Today?

new wheels

 

Remove those fugly chrome badges!

Nice bronze on red!

Wheel & tire specs?

 

Thanks!

16" method 701s 255/85/16 st maxx

 

Got ARE CX HD shell and Prinsu installed. Still have a long list to update. Happy Thanksgiving!

 

Just added the same but then bought the end caps for the header rail.

 

Made matching shirts for me and my daughter. She loves the Tacoma.

 

Nice! Just ordered these in black for my MGM.

 

These caps look great!

Do you have a link?

 

Any tire rub, want to put that tire on my truck

 

Nope! And I've flexed with them before too. Granted I am lifted 2" as well and didn't try them on stock suspension

 

Got the medium decal and intake on. Opened the box for the trd exhaust and found a tundra exhaust so back to the dealer. Hopefully no issues but bought it two months ago so we will see.

 

Nope......I've been using The Big Easy for years. No more peanut oil needed.

Can't really tell the difference, either.


It simply doesn't get any easier than The Big Easy.



https://www.charbroil.com/the-big-easy-oil-less-fryer

 

Sounds better than having gallons of super hot oil near me.

 

Installed the RedLine hood lift today. super easy to do just take your time and measure once then measure again and the use of Painter's tape is recommended tape the hood parts in place and measure again follow the instructions that come with em from RedLine they are well written it took me 1 hour and 15 minutes to do those and put the rocker panel protectors on, Make sure you have a darn good long handled Rivet Tool because that walmart one just wont do the job these rivets that come with the set are not cheap easy break ones and the powder coating on the parts is of an Excellent quality...... wonder if a certain vendor is paying attention?

 

I ran a frequency test on my new system to avoid doing dishes.

 

I went to @mesojdm place last week as he isn't to far from me and he installed a rack in my truck. The rack is made out of steel and the sides are bent up to make it stronger. The stock handles can not be used, but I've seen someone else have handles made out of braided para-cord and it looked pretty slick. Stew told me that he hung a 40lbs dumbell from the center albeit it was a static test. The rack is very well built and if its a properly dispersed load I believe that it could hold a heavier load.

 

Jonathan, how did you get this display?

 

Someone posted 3D prints to be able to use factory handles. I intend to install in the coming weeks after a few mods/welding additions

 

I did my elite struts 2 years ago with a cheap rivet gun. The fenders were cake. The upside down into the hood was a royal pain. I second using a good quality rivet gun. After 2 years I finally got the feeling back in my hand.

 

First snow day of the year.