What have you done to your Tacoma today? 1st Gen Edition

Mine did that when the windshield needed resealing

 

Check the passenger side too. Could be a plugged ac condenser drain

 

Passenger was dry.

 

It’s wet closer to the seat. The pedal area was dry.

 

Oh that's a weird area, but I suppose that would downhill

 

Oh crap I meant to ask about that on my truck awhile back. Left it sitting for a day or so at work while it was raining a lot and noticed it has a nice puddle on my weather tech mat on the driver side. Had never noticed it before to have a puddle, but have had a “moist” feeling and a little damp smell it the cab for a while. Guess I need to check in to the windshield seal

 

I’m running the same shafts as Brett after having to replace a bent flange. So far so good, but be aware that the Yukon shafts are technically for the 95-00 trucks, and you’ll need a bearing from those years to make it work. The later bearings have an inner race that is wider than the outer, where the older bearings have inner and outer race widths that are the same.

Since you’re not an E-locker or ABS, I think Longfield might actually make shafts for your setup, though.

 

I can send a pick of it when I get home later. It is 4 regular bolts with washers on each side and a nut for the front and two flat head socket cap screws that are M8x1.25 for the rear two counter sunk holes.

Mine still aren't mounted up because there was no possible way to modify them and still get them to work properly. I called AP for like the 10th time and they are supposed to get back with me when they figure something out. Frustrating but I don't really know what else I can do aside from continuing to bug them about it until I get a product that mounts up properly.

 

Keep the Damn Racoons Outta my Truck

 

I’m not into the coons but I’ll tell em

 

Sweet thanks, appreciate it.
Does yours just not line up with the bumper?
I haven't even tried to see if mine lines up, hope it does

 

Doesn't TG make some too?

 

Trail Gear bought out Longfield

 

Does the scan guage only work with obd2?

 

It'll work on the truck in your profile pic if that's what you're asking. Yes it requires OBDII but your truck has it despite being a year before it was officially announced

 

Here we go

 

Lions weren’t very active last night, but here’s some poser pics

 

Okay guys, because of my wobbling crank I’ve been looking for used motors to swap in. What’s a good price?

I put a deposit on a 5VZ for a $600 motor 2.5 hours away. Went to pic it up and here’s what I ran into. All the components were sold on it, and I was told originally no core charge and now they want a core. So I’m looking at $700 for a motor with no components, that looks like it has felpro (blue) head gaskets and they said it has 120k miles on it. They said it runs and drives truck hit a school bus but toataled it. The blue head gasket thing freaks me out a little and I’m pissed all the components were sold. I needed a electronic throttle body too and I was originally told it came with it.

What would you guys do?