1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Best Sounding Cold Air Intake Throttle Position Sensor 89452-35030 Quieter aftermarket exhaust Air filter upgrade So how do I fabricate this to work? Is it even possible? Where to buy AFE Pro Dry S filter?

JFR Equal Length Y-Pipe for 2nd Gen Tacoma, T4R, & FJ Cruisers

Discussion in 'Performance and Tuning' started by Roostfactor, Nov 17, 2018.

Page 10 of 148
  1. Nov 25, 2018 at 11:52 AM
    #181
    Stryker420

    #181
    Stryker420 Well-Known Member

    Joined:
    Apr 6, 2017
    Member:
    #215523
    Messages:
    673
    Gender:
    Male
    First Name:
    Benedict
    Mooresville IN
    Vehicle:
    2012 Tacoma DCLB
    Inside of muffler 26" long.

    1125181450.jpg
     

    Attached Files:

    Stryker420, Nov 25, 2018
    #181
    skyking3, BassAckwards and Roostfactor[OP] like this.
  2. Nov 25, 2018 at 12:21 PM
    #182
    Stryker420

    #182
    Stryker420 Well-Known Member

    Joined:
    Apr 6, 2017
    Member:
    #215523
    Messages:
    673
    Gender:
    Male
    First Name:
    Benedict
    Mooresville IN
    Vehicle:
    2012 Tacoma DCLB
    Hey Roost, after your Y pipe, I should have the v band welded to a 3" flex then what? I'm under the impression that I need a 3" high speed cat then resonator then muffler. Does that sound correct?
     
    Stryker420, Nov 25, 2018
    #182
  3. Nov 25, 2018 at 12:41 PM
    #183
    Roostfactor

    #183
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Cat is optional. I have one to help with smell and environmental footprint but you may not have room for all of that considering your resonator is 26" long.
     
    Roostfactor, Nov 25, 2018
    #183
  4. Nov 25, 2018 at 12:46 PM
    #184
    Stryker420

    #184
    Stryker420 Well-Known Member

    Joined:
    Apr 6, 2017
    Member:
    #215523
    Messages:
    673
    Gender:
    Male
    First Name:
    Benedict
    Mooresville IN
    Vehicle:
    2012 Tacoma DCLB
    Yeah I read what Loginfailed experienced with his setups. I will have to measure and figure out my available real estate under the truck. Thanks Roost!
     
    Stryker420, Nov 25, 2018
    #184
  5. Nov 25, 2018 at 12:52 PM
    #185
    Roostfactor

    #185
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    I'll take a pic in a minute to show you.
     
    Roostfactor, Nov 25, 2018
    #185
  6. Nov 25, 2018 at 1:24 PM
    #186
    Roostfactor

    #186
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    20181125_150522.jpg
    Hard to see from this pic but there is 20" from v-band to crossmember. With your setup you may be able to put the res and muff after the crossmember which would give you space for the flex and cat where mine are.
     
    Roostfactor, Nov 25, 2018
    #186
    BassAckwards, loginfailed and Stryker420 like this.
  7. Nov 25, 2018 at 1:44 PM
    #187
    Stryker420

    #187
    Stryker420 Well-Known Member

    Joined:
    Apr 6, 2017
    Member:
    #215523
    Messages:
    673
    Gender:
    Male
    First Name:
    Benedict
    Mooresville IN
    Vehicle:
    2012 Tacoma DCLB
    I am going to compile all my measurements into a picture so I can get your opinion. Thanks for your time!
     
    Stryker420, Nov 25, 2018
    #187
    Roostfactor[QUOTED][OP] likes this.
  8. Nov 25, 2018 at 1:58 PM
    #188
    Roostfactor

    #188
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Sounds good.
     
    Roostfactor, Nov 25, 2018
    #188
  9. Nov 25, 2018 at 2:23 PM
    #189
    Stryker420

    #189
    Stryker420 Well-Known Member

    Joined:
    Apr 6, 2017
    Member:
    #215523
    Messages:
    673
    Gender:
    Male
    First Name:
    Benedict
    Mooresville IN
    Vehicle:
    2012 Tacoma DCLB
    Here is what I came up with. I'll keep you guys posted on my progress when I make some...

    Exhaust Setup.jpg
     
    Stryker420, Nov 25, 2018
    #189
    BassAckwards, 5thGearPinned, Torspd and 3 others like this.
  10. Nov 25, 2018 at 2:25 PM
    #190
    loginfailed

    #190
    loginfailed Well-Known Member

    Joined:
    Aug 29, 2016
    Member:
    #195923
    Messages:
    5,156
    Gender:
    Male
    First Name:
    Dwayne
    Houston, TX
    Vehicle:
    2014 DCSB 4WD
    What’s the strap around the flex pipe?
     
    loginfailed, Nov 25, 2018
    #190
  11. Nov 25, 2018 at 2:26 PM
    #191
    loginfailed

    #191
    loginfailed Well-Known Member

    Joined:
    Aug 29, 2016
    Member:
    #195923
    Messages:
    5,156
    Gender:
    Male
    First Name:
    Dwayne
    Houston, TX
    Vehicle:
    2014 DCSB 4WD
    Rattle?
     
    loginfailed, Nov 25, 2018
    #191
  12. Nov 25, 2018 at 2:29 PM
    #192
    Roostfactor

    #192
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Hangers 2 and 3 are stock locations correct?
    Not sure about hanger 1's location. The y-pipe gets the first hanger just after the transmission crossmember.

    Also ther can be a little bit of wiggle room if you cut part of the ends off the re, muff, and cat. It's what I had to do on @rjbiii's exhaust to make it fit.
     
    Last edited: Nov 25, 2018
    Roostfactor, Nov 25, 2018
    #192
  13. Nov 25, 2018 at 2:33 PM
    #193
    Roostfactor

    #193
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Possibly. I think the inner liner on the flex may rattle slightly at certain rpm. This is a simple test.
     
    Roostfactor, Nov 25, 2018
    #193
  14. Nov 25, 2018 at 2:42 PM
    #194
    ThomasMore66

    #194
    ThomasMore66 We can't stop here, this is bat country!

    Joined:
    Feb 9, 2013
    Member:
    #97155
    Messages:
    7,290
    Gender:
    Male
    Dallas/Fort Worth & Durango
    Vehicle:
    Supercharged 2013 TRD Offroad 4wd
    TRD Supercharger, TRD exhaust, Leather seats, running boards removed (why it came with them I cannot imagine), Salex organizers, BAMF behind-the-grill light bar, Rigid SR-20 and SR-Q - Spots mounted behind stock grill, color-matched grill, WeatherTech FloorLiner DigitalFit floor mats, Tech Deck, Avid bolt-on slider/step converted to weld on by TW member Achirdo, Diaz Fabrication Model T, Icon Stage 4 with OME Dakar rear leaf springs, OME Driveshaft spacer, Toytec 1" Front Diff Drop, FN BFD 18"x9" GMG Wheels, BFG KO2 285-65-18 tires, Ultragauge mounted above mirror, Tuffy Box lockable storage, MattGecko rear window security bar, Relentless Fab tailgate protector, CSJumper 700 lumen flood pattern back-up LED's, modified BeeRadd under-hood lighting with two KC Cyclones; KB Voodoo cargo management system and standard rails, AllPro hi-lift jack mount, 48" hi-lift, RCI Metalworks aluminum front skid, Flyzeye 3VP-RS in glovebox and console, AFE CAI, Coupe fuse box cover, battery hold-down bracket and CAI air-box cover, Wurton pod led's installed as bed lights on Lowbrow Customs motorcycle fork brake line aluminum brackets, Pop-n-Lock PL5400, Extang Solidfold 2.0, Rechelon Retro's, Moromoto LED fogs, URD Y-pipe, Walbro 255lph fuel pump, Speedhut AFR and Boost gauges, Cravenspeed gauge holder, CMC by Tandem Automotive, 70mm throttle body, CSF radiator, Doug Thorley shorties, Vibrant 7101 cats, SOS Offroad front and rear bumpers, Smoothflow 2.5” SC pulley, Steeda SC belt tensioner, roostfactor belt wrap kit, switch Pro 9100 in custom Tandem Automotive holder, IPT overhauled transmission, FIC 650cc injectors, HP Tuner, entire engine overhauled by Engineered Performance, Alvarado, TX.
    ThomasMore66, Nov 25, 2018
    #194
    TitanRattler813, BassAckwards and Roostfactor[OP] like this.
  15. Nov 25, 2018 at 3:38 PM
    #195
    Stryker420

    #195
    Stryker420 Well-Known Member

    Joined:
    Apr 6, 2017
    Member:
    #215523
    Messages:
    673
    Gender:
    Male
    First Name:
    Benedict
    Mooresville IN
    Vehicle:
    2012 Tacoma DCLB
    Yeah the 1st hanger does go to Y pipe, I guess my hanger location 1 is actually the crossmember in your pic, see attached.

    RF1.jpg
     
    Stryker420, Nov 25, 2018
    #195
  16. Nov 25, 2018 at 3:42 PM
    #196
    Roostfactor

    #196
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Ok, that makes sense. I made that hangar and bolted it to the crossmember. There isn't one there stock. I used the rubber piece from the stock drivers side y-pipe because it isn't used with mine.
     
    Roostfactor, Nov 25, 2018
    #196
    Stryker420[QUOTED] likes this.
  17. Nov 25, 2018 at 3:52 PM
    #197
    Roostfactor

    #197
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Are you going to have the whole system powder coated? What is the part # for that muffler?
     
    Roostfactor, Nov 25, 2018
    #197
  18. Nov 25, 2018 at 4:23 PM
    #198
    Stryker420

    #198
    Stryker420 Well-Known Member

    Joined:
    Apr 6, 2017
    Member:
    #215523
    Messages:
    673
    Gender:
    Male
    First Name:
    Benedict
    Mooresville IN
    Vehicle:
    2012 Tacoma DCLB
    Part #: GP192106, I sourced from auto anything. Yeah I want the whole system ceramic coated to match the finish on the URD headers.
     
    Stryker420, Nov 25, 2018
    #198
  19. Nov 25, 2018 at 5:21 PM
    #199
    Roostfactor

    #199
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Crazy, I wonder what that would cost? I also don't know if they will do the cat because of the heat but then again headers get red hot and the coating works great there.
     
    Roostfactor, Nov 25, 2018
    #199
    Stryker420[QUOTED] likes this.
  20. Nov 25, 2018 at 5:37 PM
    #200
    Roostfactor

    #200
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Roostfactor, Nov 25, 2018
    #200
Page 10 of 148

Products Discussed in

Mobil 1 104361 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)
$28.27
Vibrant Performance 1142 3" Ultra Quiet Resonator
$124.53
Shop Iron16023 Damaged Bolt and Stud Extractor Tool for 1/4" to 1/2" Studs
$18.39
Denso 5346 Spark Plug
$12.14
EVIL ENERGY 2.25" Exhaust Clamp,2 1/4" Butt Joint Band Clamp Sleeve Coupler Stainless Steel for Pipes,Mufflers,Catalytic Converters 1PCS
$12.99
To Top