San Antonio

Good advice here! Im sure someone on here has some spacers for the front they would sell you for cheap, or even give you.

 

Phone

 

I think these will actually be close to fitting even without a lift. If they were 275/75/16s I think you'd definitely have to lift it.. Maybe try putting just the fronts on when you have some free time. I think you might be good to go honestly

Edit: if the guys at discount told you they wont fit, I wouldn't believe them lol..

 

No likey

 

There an inch taller and half an inch wider the half inch wider part is the problem

 

I’m pretty sure they won’t fit on a stock setup, I’m one size bigger and still have slight rub

 

There's only one way to find out.. I say give it a try, only have to try one side on the front, that should be the defining factor. If they rub anything it will likely be the rear portion of the front fender well

Edit: im not saying throw them on and go drive it around and risk screwing up your new tires. Im just saying put one on and turn it lock to lock in your driveway and see what happens

 

Where does it rub on yours? You did the CMC yourself right?

 

I tried, came with OR shocks

 

That piece of frame that is before the door where mine rubs and I ant even at full lock

 

Still rub inner fender area, plastic part but not the actual fender, yes cmc is done.

 

I ran 265/75/16s on stock suspension that was wayyy worn out and sagging from my front bumper and I was even able to leave my mud flaps on. Since you don't have flaps, that is also working in your favor. FYI, my bumper made my tired front suspension sag over an inch..

 

Ahhhh I see, well hell, maybe you do need a lift

Im thinking someone in the TTC thread has some spacers they'll give you. Lots of good folks in there that have upgraded and likely have some sitting around collecting dust

 

You selling that camper anytime soon Robert lol

 

We can fix that

 

haha no way brother! Took me a long time to find it, and I have way too much crap in my bed that needs to be protected from the elements. I will keep an eye out for one for you though if you're in the market

 

Ya e trimmed more, just a slight rub, think the suspension has settled just a tad more so think I may look into a small top plate to gain a little lift

 

Nah I was bs you I don't like them honestly rather buy an fj or 4 runner before I buy one of those

 

Take a heat gun to the plastic and just push it back, and you may not have to trim anything and be able to avoid the top plate as well. That's where I would start