DFW RC - Home of BYSRacing

I have their LCG tans mount. It does what it’s supposed to. Since my rig runs with the shocks all the way compressed, it would have prob been more beneficial had I gone with the high clearance. However, my motor already pushed the interior up in the middle, so if I were to try and switch, I’d have to do something about raising my “floorboard” up. As for chassis, FCP seems to know what’s up with these things, but I’d prob go for the Blazing RC chassis if I were to do one.

 

Rebuilt all my shocks this morn. After doing the rear, I noticed the holes in the pistons were barely visible, so I took my reamer and cleaned them out some. HUGE difference in rebound speed. Only did the two, as I didn’t want to remove and redo the rears, so will have to run it and see what type of diff it makes. I’m hoping since they feel smoother/faster, they will react quicker on steep inclines and keep the front from wanting to swing the weight backwards. We’ll see how it goes. Usually when I do something like this it fucks me....

 

I'm kinda wondering if I need to go heavier weight oil in the front. When i compress and then let go it slams down way too fast. I think with the brass it's too heavy for the 30wt.

I'm jones'n bad to run out of IWRC... I feel like a kid that got a new toy and got grounded from it.

 

Yeah, I went with 22.5 wt, and there’s def little resistance. If it seems too “loose” I can switch to pistons with less holes (have them 1,2, 3, & 4 holes. Currently using 4.), or swap springs for some stiffer ones (Also have multiple spring options that came with them. Desert Lizard internal spring shocks.) Lots of ways to try and dial it in, but other than trial and error, will take some work figuring out optimal settings.

I need some racing in my life. Tried banana and it was pretty lame other than a big wall ride.

 

Maybe ill make an appearance next race.

Hows the sct410?

 

What did you run at Banana?

 

Titties and Beer!!! I dig the shit out of it.

 

Theyre all saying the layout looks dopeeee. It should be this same layout until Jan I think. Ice breaker should be early January.

 

I ran my SCT on the “off-road” course. It’s tiny and lame. Prob 7-10 sec laps lol. You gotta have special tires to run the oval, it’s CRC carpet or something

 

Shit! Ive been gone a minute, cant believe ice breakers is already happening again.

 

That does sound lame.

Stoked as hell on the new track.

 

You can prob get a decent idea of layout if you check the camera on liverc

 

Redo.... icebreaker is in March, so this will be the layout until then. It’s prettttttty sweet. You can check the track out on FB if you follow Indy rc World and/or Indy rc World drivers lounge (the lounge is where all the action is.)

 

Anyone?

 

Sweet

 

i dont get off till 3 and it will take 2 hours to get there from dallas.

 

I was up in Salt Lake for the weekend. Anybody go?

 

@Egnaro and i crawled and bashed at WS yesterday and today, felt good to get some cars out

 

Crawled at duck on Saturday, then swung by Indy for a little bit to check out the races/Track. Tuesday is gonna be a good one!!

 

Sweet... I'm stoked for tomorrow. Got my LF springs in and got all the measurements dialed in. I found my old setup wheels from back in my TC days. Makes it a lot easier to get good measurements.