A connector that has no plug?

I was recently swapping out for the TRD Pro Grille, and before I touched anything noticed this connector with no plug... can anyone tell me or lead me in the right direction to what this is? On a 2019 Toyota Tacoma SR ACLB with SX Package. One pic is enlarged to better see connector.

 

think all tacos come pre wired for fog lights. that's exactly where my fogs attach when I had to remove grill and bumper.

There was a post like this before, and people had same response at that point as well.

 

If I don't forget I'll see if it's on my 17 OR.

I'm betting it's adaptive cruise or something like that.

 

https://www.tacomaworld.com/threads/what-is-this-empty-plug.568892/#post-18733803

 

Thank you I’ll have to read through the post.

Not sure because I do have the TSS. But if it’s prewired for fogs that will save me a lot of head ache in the future if I add them.

 

Thinking about it while driving, it looked like there's only two wires, so if you don't have fogs it's probably fogs.

You might need a relay and a switch or signal stalk with a fog switch.

 

Yeah I called Toyota about fogs a month ago and he said Toyota doesn’t even offer fogs as an accessory for the SR’s but going through here it appears it is possible to do.

 

Just checked that's fogs.
That's where my fogs plug in.



That's my fuse/relay box under the hood. The one above the purple one is the fog relay.

 

What do you even have fogs? Looks like nothing is plugged in unless it’s bent downwards. I apologize I’m probably just missing it.

 

So your fogs plug in here correct? Same plug that I have with nothing plugged. I circled it in your picture.

 

My fogs are down there right now.

There's a small harness that goes to each fog.

 

Oh hey while ya got that bumper off wanna throw it on mine? And thank you for all the info!

 

Anytime.