What Have You Done To Your 3rd Gen Today?

Looks great!

I just ordered a new one off of Amazon yesterday. From the videos I've seen, it's simply plug and play. Any issues with the install?

 

Train horn was cheaper than Arb air

 

de-badged the new truck and buffed/waxed/polished where the badges were. Showtime polished the whole truck. The FC14 Midnight Black Metallic is gorgeous when it's clean.

 

Today:

- Added the bed mat that my daughter got for me off the Evansville CL for $55 ...
- Installed interior LEDs from superbrightleds.com for the dome and map lights. I got the 30mm one for the dome ... way too large IMHO. Twenty-eight would be easier to deal with.

 

What polish do you use?

Here is mine at 800miles... After 7 hours of detailing. Went through rainy construction they must have layed fresh oil that day, the whole truck was covered. WD-40 bath, then Top Coat F11 polish. Love top coat.

 

Thanks! No issues. Unscrew, unplug, slide on the new one, connect, tighten down the screw program and done.

 

I used Meguiar's NXT 2.0 wax and finish polish it with Mother's Showtime polish. I used to used the Wizard stuff.....there's lots of good options out there. I"ll check out the top coat as I always like new products to investigate. I won't be crazy anal about the truck but it's only got 600 miles on it so I'm going to keep it purrty for awhile

 

MESO Limited Edition DRL/switchback mirror signals:

 

Added Method 701 wheels and 265/70/17 Falken Wildpeak tires.

 

Got them not really Dirty 5’s mounted. Still need to do a bit of fender persuading.

 

Had to upgrade the 2.1a 1st gen is a piece of crap.
Now this one works perfect with every device including a Nintendo Switch & a Galaxy Note 9.

 

How'd you do it?

 

Reported for not staying back 500 feet

 

Zoom lens!

 

Installed

$160 Rexing V1P 4K Car Dash Cam 2.4" LCD 2160p Front + 1080p Rear Wi-Fi 170° Wide Angle Dual Channel with Rear Cam, G-Sensor, WDR, Loop Recording Mobile App Supercapacitor

Rexing V1P dash cam.

 

Ahhhh back into the Third Gen area ...... So here is a Question I have .... Now first thing first ... Why the hell do so many here from the 2nd gen spend so much time bashing down the third gen Tacoma's? and Yet I see so much more issues talked about with their 2nd gens from whining about this noise and that rattle to my Mpg sucks to my frame is rotted thru ... oh you get it I'm sure.

I have no complaints about my Third Gen Nor any Complaints about my First Gen and never owned a 2nd gen so what am I missing? not much from what I see! well? say what you want to say Just be aware I reserve the rights to reply to any and all comments as I see fit after all if you can't have a little fun and a sense of humor here there are a bunch of places one can go to.....

 

Finally put a lift on the truck. Dakar mediums in back and @Plastics Guy bolt flip and bump kit @LSK SUSPENSION UCA's in front. Billy 5100s rear and 6112s front.. . For now. Thanks for the help @Bot_Chu

 

Very nice. Is the front camera mounted to the Go Pro factory mount and if so what did you use to mount the camera? Also how did you run the wiring and did you have to remove the headliner? Thanks