Doozy4212's 2017 TRD OR Build and Trip Reports

I'm out east at 70 and E470. Basically Kansas haha

 

SHIIIIT basically!

 

I paid 2600 OTD

 

how I feel out there sometimes haha

 

Update 11/28/18:

I recently repainted my Mobtown bumper after doing some work to it and ditched the propane tank for at least the winter. I also drilled a hole with a 3/4” bit near the hinge point to run the wire loom for my reverse camera through for an overall cleaner look!



I also took the the time to wrap the wiring for my cap LED strip lights and the Pop and Lock wiring in a splitloom and fully tape it to to OEM harness on the passenger side for protection and cleanliness.



My biggest mod as of late was the ditch lights. I bought a pair of Baja Designs Squadron Pros off of another member recently and got them installed on my truck. I did a lot of litte adjustments to this kit to make it as perfect as possible. For one these are slightly older Pros, they still put out 4300 lumens a pod but they came with a graphite bezel. I replaced the gray bezel with the black sport bezel i had left over from my Squadron Sports that are serving as my fogs. Additionally I extended the provided splitter from BD with and extra 3 feet of wire and wrapped it in a 1/4” split loom. I also bought a MicTuning harness, cut 90% of the wire off of the ends to have a clean, short harness to complete all of my wiring to the light, fuse panel and switch.



And finally, my last big mod recently was cutting up and shortening/lengthening the harnesses for my Xenon Depot HID Kit. I’ve wanted to chop the inline fuses out for quite some time and get these wired to my fuse panel and I finally made the time and made it happen! Again, after everything was soldered up it was wrapped in 1/4” split loom and electrical tape to ensure issues never arise. Here are the results.

 

Looking good man

 

Thanks buddy! How’s Kansas?

 

Haha flat and full of geese!
BTW got me an epic pass, did you?

 

I have the Ikon, however I’ll pay for a ticket at A-Bay or Vail if you spot me a buddy pass, I’ll do the same for you at Copper or Winter Park if you want to join

 

I’m still deciding on if I should get a pass... I know it’s late to decide but convince me to get one

 

Get the Ikon, I saw the twigs on your truck at the RMR open house....

 

Also, that wiring looks clean Drew, i need to take a page from your book

 

Lol the rack was mine but the twigs weren’t, mine are still in the back of the garage. I’m online looking at the ikon as we speak

 

Thanks, I have spent a lot of time ‘perfecting’ it. I want to believe I am eliminating gremlins in the future.

Meet me at Mary Jane on Saturday morning

 

Nice. We could do that

If I didn't get the military deal I'd go Ikon

 

Make that Sunday and I'll be a maybe Today I put in my two weeks at my job that eats every Saturday. So I'll likely be skiing a lot more than I expected... but I might be begging for rides if I don't find another job ASAP though lol

 

I can do Sunday. I can pick you up from the Dino lots! Lol

 

Haha I'll likely be getting my pass next week. Also, probably snow wheeling Sunday if you would like to join

 

did you fill your camera slot in your tailgate handle?

 

No but I plan to figure that out someday