What Have You Done To Your 2nd Gen Tacoma Today?

you looking for the seal that goes in the spindle?

 

What state are you in? Never seen a license plate like that before...

 

Here you go. Took a picture of the gap as well. Im going to work on this today to eliminate it. Also going to fix my headlights fogging up which started earlier this week before my grille install. So embarrassing to look at. I can’t stand it!! I even sealed them really well before install last year.

 

Yes just popped right in

 

I love the look! Always wanted the 3rd gen pro grill on 2nd gen! Let me know if you fix that gap!

 

@kiahb12

 

Just finished the ECGS bushing install. Pretty straight forward except for the fact that there is no room to swing a hammer.
I tried to remove the bump stop to gain access and the stud broke as soon as I started to turn it. I'll leave it alone until I install my lift and just put aftermarket bump stops in it.

I also checked the voltage at the blower motor at different fan speeds. I could never hear the blower on low and wanted to see if it was in fact getting power, which it is.

 

First mod. I did the center console modification I found on here.

 

I finally removed and cleaned it / I pulled out more than 170 gr. ( about 6 oz.) of dust.
Got rid of gas fill-up problems !
proudly home solved issue without any help of internet or youtube (found nothing about the problem)
Hope it'll be helpful for another 2014 Taco owner.

 

New escort M1 dash cam.

 

Got the rear Katzkin's in today. On to the front now.

 

Just installed diff drop.
Wasnt really impressed with the difference that it made on the CV axles and didn't feel like it made that much of a change in angle.

Before
After
Decided to remove and go without rather than cutting into the skid plate with the angle grinder for barely any change.

 

still have space on the passenger shade

 

More fun in the snow today before they start grooming these trails for snow machines

Was just the wife and I so had to make sure I did not get us stuck

 

Awesome! Thanks

 

First wash and wax with the new lift.

 

Fab Fours installed. IMHO it looks way better than the oem. Rear sagged 1/8 inch with this 100lbs beast...

 

It looked good coming out. PM for the win!

 

@tacotunner06 ABSOLUTELY!! I think it is called axle dust boot or seal. I just came back from the Toyota dealership here and the help/knowledge behind the parts counter there wasn't giving me any warm fuzzies.