AZ PewPewPew Meet aka @Mike330R shooting diary

Cheapest I have ever seen this scope.
I have 2 and they are the bomb.

https://www.ar15.com/forums/Equipme...VX-R-Patrol-1-25-4x-345-shipped-/163-1828091/

 

Why?? I need a new roof! Hate being poor

 

Loaded up 150 rounds of 45. took them to the range and they all went bang! Shooter needs some work! Came back and loaded 150 more to replenish what I shot! Loving this Dillon 650! Bruno's is going to get even more of my business as I can see the powder and bullets going quick.

 

Done. I think I need to get a Dillon 650

 

Headed back out tomorrow. Going to confirm zero on an AR with a suppressor, play with a new CZ with a fresh trigger kit installed, and a little suppressed .22!
Any of course some S&W 686 pew pew.

Here's the CZ trigger:
https://www.instagram.com/p/BrLU0MHBiUj/?utm_source=ig_web_copy_link

 

@azshooter40 is the Dillon new? Thought you reloaded already.

 

Got the Larue 5.56 re-sighted in with 77gr reloads. It was sighted in with 55gr wolf gold previously. I was surprised I had to down 4.7 and right 1 MOA.
Once sighted in I tested it suppressed (left and right group) and unsuppressed (middle group)
https://www.instagram.com/p/BrNkqW4hbc8/?utm_source=ig_web_copy_link

Got the CZ SP-01 dialed in. Had to move the rear sight. I really need more hand gun practice!

Will do my mountain top shooting tomorrow with AR's.

 

Also the Larue is still gassy AF suppressed. I'm using a Bootleg adjustable carrier which does help. When I took the suppressor off I forgot to put the carrier in unsuppressed mode and it would not pick up the next round. May have to go to a adjustable gas block.

 

No, bought this one off my friend. I used my single stage for everything prior. Still do for all my rifle rounds.
Already have the toolheads and dies fo 45/9/10 some I am ready to go.

 

Ahh nice. Pistol rounds on a single stage must take forever!
I only do .260 on a single stage.
Pistol and .223 on a Dillon 550.

 

I had an adjustable gas block AND carrier in an SBR and it was still gassy.
Maybe it wasn't tuned right.
I'll wait for a ale at SLR and order a block or 2. They make them with the right bolt spacing for larue barrels.

 

Mmmm, cherry creme.

 

if it will take an AR charging handle get one of these..
Radian Raptor SD Ambidextrous Charging Handle
amazing!! use coupon code BF20 for 20% off the site now https://sunnystateoutdoors.com/products/raptor-sd-ambidextrous-charging-handle?_ke=eyJrbF9lbWFpbCI6ICJjeXRvY3ljbGVAeWFob28uY29tIiwgImtsX2NvbXBhbnlfaWQiOiAiY0tUVUp4In0=

if you shoot suppressed a lot spend the $20 more for the NP3 coated one which makes cleaning a breeze.

 

I have a few of those handles but none of the SD versions. Been wanting to pick up a couple but I 'need' FDE. Most of which are sold out.
Currently using a PRI gas buster handle which does help over the standard radian.

 

NP3 will match like Scar FDE setup... seriously these make a huge difference and are rarely this discounted.

or if you want to try mine and see if it helps enough you are welcome to.

 

Only black is in stock from the link you posted.

 

Damnit they sell out fast my buddy just bought one this morning after they sent out the discount email. Sign up for their emails.

 

Todays adventures weren't to exciting.
Tried a 22 Mag at 300 yards with no luck in the wind.

The AR was to easy. Shot maybe 60 rounds. Hun out up there for a while glassing the valley. Then explored a little on the way out.


Scope view of torso target at 400 yards. Leupold 1-4 VXR @ 4X.

 

Sexy