Onboard Pressurized Water System for the 2005-Current Toyota Tacoma OBW

Check out my placement back in the postings

 

I seen yours. Like the set up, I use my driver cubby for bike supplies, line and cleaner. Stuff for bikes, but that other small cubby on the passenger I don’t. I think I’m gonna try and modify that to accept the pump, I’m thinking the cubby on the passenger side it should fit. Maybe with some slight modifications. Then probably put the intake connection around the underside close to my air connection, since I have a small 5 gallon tank from academy I use for my non potable water right now. I’m gonna play around with a few set ups.

 

PM sent, definitely want but not in a rush

 

Alright everyone. Getting ready to run another round. Who's in?

 

Me me me!

 

Need 5 for another round

 

Bump.... Making more. Let me know who's in

 

I dont remember if i posted about it before
I got my system in one of the first batches and i love it it is still one of my favorite additions to the truck it comes in great use when doing dishes camping as well as many other uses

 

subbed for interest. Thinking this can replace my waterport for dishes, and my other water tank for drinking water. does the loom that comes with it extend from the bed to the battery?

 

Yes the loom extends from the driver side cubby to the battery, but it has a lot of slack, so you could probably get the pump in a different location if you tried. I put mine in the driver side cubby and just zip tied the slack in a loop in the fender.

 

Perfect. It’s not high on my priority list, but it’s on there lol

 

Sweet idea. Will order eventually

 

Subbed, I want one but with the 2019 delete of the drivers side cubby hole maybe the portable route is the only option? Any Newer pics out there of alternative portable version?

 

Anyone have a good on board water tank to fit on the Tacoma’s? Would love to have one that basically fit on the front of the bed

 

$65 RotopaX RX-2W Water Pack - 2 Gallon Capacity

https://www.amazon.com/RotopaX-RX-2...rotopax+water&qid=1550634968&s=gateway&sr=8-2
or

$60 RotopaX 1.75 Gallon Water Pax

https://www.amazon.com/ROTOPAX-1-75...rotopax+water&qid=1550635013&s=gateway&sr=8-3

mount to your bed with these FWP bed rail brackets:
https://www.tacomaworld.com/threads/fwp-fab-bed-rail-mounts.484308/

and of course the actual RotoPax mounts of your choice (lox or regular).

 

Just a quick pic of where I ran my quick disconnects to. Anxiously awaiting the summer to get more use out of it.

 

Edit: NM, I figured out the parts.

@ProForce Love your kit, and finally was warm enough to use it on a recent trip. Works well if you have the proper expectations. Unfortunately, some muddy doubletrack caused the battery wires to make contact with the exhaust heat guard by the motor and no mas OBW. With that in mind I decided I want to go a different direction with it.

I like the idea of your portable version and another one I saw recently. My question is what kind of cable are you using to have a 12v cigarette lighter plug on both ends? Is it just the battery tender cable linked down below with the 12v attachment plugged on both ends?

Looking to make a copy of this with the kit I have:

 

I would like to purchase one, totally forgot about the other run you did. I can PayPal you the money today

 

Sorry to hear about the wire issue. That's a bummer. I installed a female 12v cigarette plug into the front center of the box. Then used a male to male to power the kit. Those pictures are not mine and looks like someone replicated it so im not sure what wire harness is used in that photo though

 

Just got back on TW for the first time in several weeks. I have several pms about kits also. Let me get a list together so i can make this happen. Ill get you an update by the end of the weekend