What should I set my King C/O with OME HD leafs?

@JoeCOVA thank you for your input. Is that what you are running with your coils up front? If i may ask, with that much threads showing would that be considered 2.5 to 3" of lift? Sorry, I dont know the ratio turns/threads showing to how much inches of lift achieved.

 

Yah if the rock is like that the 6-ply will definitly keep your mind more at peace

 

It's sitting at 2.5" up front but I have lo-pro with winch and full skids and sliders

 

@JoeCOVA nice. So since all I have is sliders and no extra weight up front (bumper is in the works in the near future), would you recommend setting my coils/threads at a few less than of what you're showing since I have nothing weighing them down? I'm also looking to achieve about 2.5" of lift up front with the HD leafs in the rear.

 

@SpeySquatch yea man for sure. I'll keep doing research before I dump more money into this thing lol. Thank you for your help though!

 

What coils are you running now 700#? I would probably shoot for 10 threads to start and see how you like it

 

@JoeCOVA I have the 600# that they came with. I was thinking about 10 threads. I dont need anything too crazy. I just want the front about level with the rear after the HD pack is installed. I want to keep a little rake as well to compensate for sag when fully loaded with the fam and gear.

 

I would do 10 then, I have 700# to compensate for the bumper and stuff

 

@JoeCOVA I figured. I would also like to upgrade to 700# if and when a front bumper is added. Thank you for your input!