What Have You Done To Your 2nd Gen Tacoma Today?

Replace a light bulb in the Heater/AC dash panel, expensive little thing at $13.45 + tax. A qiestion why isn’t the mirror switch lit. A pointer on the Shit panel would be nice

 

How much did the Windoor run you?

 

I had that issue on my new sway away 2.5 reservoir.
But only on the passenger side when adjusting ride height

 

And from whom did you order it?
@ProfessorWiggins

 

interesting. my reservoir is holding pressure and im not getting air bubbles in the shock body while servicing it up with nitrogen. Ill check again at next service

 

Look what came in the mail today @LSK SUSPENSION so pumped I pulled the trigger on these. Just need my rubbers and coilovers and its on

 

Got a new pic in Key West today...

 

Decorated a few days ago, but just took pics tonight.

 

Got rid of the trash 3” lift blocks and the trash OEM leaf springs and the trash OEM bump stops. Essentially took out the trash. At least in the rear..for now. Also added the U-bolt flip kit. It actually rides a lot better then I expected.

OME Leaf Packs
U-bolt Flip
Super Bump Stops
OME Bushings all around

Before


After





Finally no axle wrap!!

On a completely unrelated note I have a set of 3” lift blocks including the u bolts for sale

 

badass! what size wheel spacers are those? what brand?

 

Thanks man. I bought them off eBay, they are 1” thick and the brand is Vasture.

 

I'm embarrassed to admit that it cost me $431. The intention was to replace both side windows too but certainly not at that price. And to be honest, I wont consider this project worthwhile until (or even if) I find a buyer for the old window and recoup some of that cash.

Fuller Truck Accessories in Fullerton, CA

 

Dude! Mine come in Wednesday they look freakin awesome can’t wait!!

 

I’m looking to do the same I have a 6” block... did you knotice any sage after the swap?

 

Installed the ARB dual air compressor and swapped my crappy custom Spod mount with the power tray and cleaned the hell out of my engine bay... ‘twas a busy day of wiring!

Has anyone ever wired an ARB compressor to a CH4X4 OEM style push switch?

 

No I didn’t notice any sag, I only installed them tonight though. It sits petty much level with the OME daker leaf springs in the rear and a 4” lift in the front.

These leaf springs only add 3” to the stock height though. With your 6” blocks you would have some major sag. Unless you added a 3” block along with these springs.

 

finally got around to mounting my new tailgate/tire carrier up. had to do some beefing up of my relentless bumper just to make sure the hinges didn't cause any flexing of the bumper.

 

I’m gonna check out Deaver custom leaf and see what they can do for me

 

Also added in the Tech Deck and a midland GMRS radio thanks @ETXTacoma for having an awesome build to follow!

Not yet sure how I’m gonna mount the antenna and wire it up


And lastly weather tech rain guards

 

Holy giant block, Batman!