1st Gen Lunchtable Thread - General Discussion

Idk, ome and some shops correct taco leam by lifting the fl or fr corner by like 10mm

 

@eon_blue toytec makes a taco lean spacer so does ome.just research it more

 

im back in good ol indiana

 

Yeah but that's usually because Taco lean is due to the front sagging not so much the rear. At least that's what I always assumed...I don't really see how putting a spacer on the front would correct the rear, at least not as well

 

No taco lean is backwards, you lift the front. Google it. It’s weird

 

Welcome back, did you get quarantined?

 

Hmm well that would put me in a predicament, don't want to crank up the fronts anymore since my CVs are precarious enough as it is. I'll just live with it lol

 

Dont listen to him. You need something in the rear.


Miguel, crank the front right coil? Repeat that to yourself slowly.

 

Let’s use some logic now, how does that make sense

 

You are only lifting like 10mm

 

I found you a new profile picture

 

Toytec and ome both sell spacers to correct taco lean. You can look this up. Its been discussed before

 

To fix the front, where the battery is, not the back.

 

Have to say this is a close second to the $41 in singles under expired Ramen.

 

https://www.tacomaworld.com/threads/ome-5mm-spacer-fix-tacoma-lean.77822/

@JKO1998 @Blue92 not my words TW words

 

You said to crank the front right coil. His problem is in the rear. Nothing he does in the front will help.

 

Actually meant FL but read the thread

 

So if I lay a 1x12x2 flat on the ground and put a marble under one corner does the other corner on the same side lift up too?

 

Did you try reverse before you tried the shovel?


Some solid snow tires there

 

I'm sure you got the "really you idiot" look.