Jerneyman's Taco Build w/ Chevy 63 Swap and Welding Thread

Bought my 2011 Tacoma 4x4 Offroad November of 2015 and started building it almost a month later after I wrecked the front end on a doe. Luckily insurance paid out directly and I was able to purchase my first mod, my CBI Offroad Moab 2.0. Then my suspension started to sag slightly so I bought a suspension lift. And on and on it went and never stopped. I promised myself that this truck would be stock for a while, well that sure did go out the window pretty fast.

Here she is a week after I bought her.


And here she is in her current state-ish... more to come.


***BUILD LIST***

**Armor**
CBI Offroad Moab 2.0
Homemade Weld-on Rock Sliders w/ kickout
Homemade IFS, Mid, and T-Case Skids
Homemade High Clearance Rear Bumper w/ integrated tow hitch and swingout

**Suspension**
ADS Front Coilovers (Extended Travel, 700lb coils, Remote Resi)
Total Chaos UCAs
Total Chaos Cam Tab Gussets
Total Chaos Spindle Guessets (w/ sway bar)
Wheeler's Offroad Front SuperBumps
Chevy 63 Swap
Bilstein 5125 14" Shocks
RuffStuff Specialties 63 Swap Kit w/ 5 inch shackles
RuffStuff Specialties 4 Inch Outriggers
Homemade Shocks Hoops
Trail Gear 16” limit straps
Daystar Bump Stops
29 inch SS brake lines

**Drivetrain**
IEDLS Carrier Bearing (Polyurethane)
4.56 gears Front/Rear from East Coast Gear Supply (solid pinion spacer, ECGS bushing)

**Wheels/ Tires**
4x Spidertrax 1.25" Wheel Spacers
TRD Rock Warrior Wheels
285/75/16 General Grabber ATX

**Electrical**
Pelfreybilt Auxiliary Fuse/Relay Panel
Blue Sea Fuse Box
Bussman 100 AMP Breaker

**Recovery**
Smittybilt 9.5k Winch
Warn Steel Hawse Fairlead
Genuine 48” Hi Lift

**Lights**
20 Inch Single Row LED Bar
Rigid Side Shooters (Flood/Pair) w/ CBI Offroad Ditch Light Brackets
Rigid Duallys, Amber for fog lights

**Comms**
Cobra Ultra III CB Radio
3 Ft. Firestick with Firering Mount

$40 Baofeng UV5R Dual Band 3800mAh Rechargeable Two Way Radio Walkie Talkies for Adults with Earpiece,Speaker Mic and Programming Cable Full Kit (Black-1Pack)

Baofeng UV5R (F8HP)
2 Meter 1/2 wave antenna w/ NMO mount
All antennas mounted to front hoop of bumper

**Miscellaneous Mods**
Rear Diff Breather Relocation
RAM Mount A-Pillar Mod w/ twin USB charger
Homemade Ram Mount in AC Control niche
Ammo Can Bed Rail Tool Box (Removed)
Cab Mount Chop
Pinch Weld Mod (Mini Sledge Special)

I'll be updating this OP soon with a full build list with pictures as well as future plans. Feel free to BS and/ or talk about my truck. Thanks for stopping by!

 

Off to a great start.

 

Thanks! I'll be buying a MIG welder here in the next month or so. This truck has no idea what's coming. Haha. Planning to build some skids and put together a DIY rear bumper hopefully.

 

That'll be sweet. I'd love a welder but cannot unfortunately get one.

 

Just purchased my first welder. Its the Hobart 210 MVP. Should be coming in mid July. Plans are to build a new IFS skid plate and weld in some gussets on the spindles and alignment tabs then who knows what.

 

Here's an update. Bought my Hobart 210 MVP and built full skids and a high clearance rear bumper within the first 3 months of owning it. Needless to say, I've been welding a lot.

Here are my pictures from my skid plate build.

 

My high clearance rear bumper build pics:

 

Antenna Mounting tabs for my CB and VHF antennas.

 

Finally got my CB mounted in the truck and my firestick installed on the new antenna mounts. Driving with them mounted on the front is not as distracting as it looks. You get used to it fairly quick.

 

Finally got around to installing a Ram Mount plate on my dash. I made this one myself and it seems to be working so far. No flex in the mount itself when the radio is mounted on the Ram arm. The cradle for the

$40 Baofeng UV5R Dual Band 3800mAh Rechargeable Two Way Radio Walkie Talkies for Adults with Earpiece,Speaker Mic and Programming Cable Full Kit (Black-1Pack)

Baofeng UV5R is 3D printed courteously by @coke can.

 

Not built for my truck, but something I built for @whitedlite. Bed bars compatible with a bed cover. Nothing too extravagant but it’s strong and gets the job done.

 

Custom bed bars doing their thing at Windrock Offroad Park.

 

You should post some pictures of your steering stops on here when you get a chance! You were my first job after all.

 

Oh I'd have to get pics!! I also need to of my exhaust reroute you did.

 

3rd Gen Weld On Rock Sliders with no kickout and angled 20 degrees upward.

 

Latest trip to Windrock was a success. Got to smash my skid plates a bit and test how my welds held. Turns out they held great and kept me rolling all day.
Rear bumper was the same way, scraped it a few times and barely noticed it. Looking forward to going back soon!

 

Added hoops to my rear bumper... more like tree sliders. Still not sure if I’ll add more to it to encompass the tail lights or not.

 

Sliders recently welded on for @R4MBLN_YOTA with no kickout and a 20 degree angle.

 

Love em man!!!