PrInSu Design Studio Roof Racks BS Thread

Thanks for help. Do you have any pictures of it with the lightbar? I'd love to see how its mounted and looks overall.

 

Era3 cases seem to be gaining some traction if you want to fully ball out and up some commas on a case. All of them are gonna mount the same way, so you could use anything between a cardboard box and a metal stinger case depending on what you wanted.

 

So for a single row light bar like my 40" S8, I found I could mount it straight off the front cargo bar and it would clear the non-cutout deflector just fine.

 

I placed the brackets on the rack, positioned the lightbar w towels to get the right angle. Marked and drilled out two new mounting holes.

 

Anybody ordered from CBI lately know what kind of lead time these have? Never ordered from them. Just curious what timing I can expect.

 

Their website says 1 week or less for Prinsu, other items have longer lead times, up to 12 weeks.

 

Does anyone know if it's possible to custom order one to fit a 52" light bar? I know it was done in the past before Prinsu changed hands to CBI, but how about now?

 

Thanks!

 

I think the rack itself is much narrower than that.

 

Thats sick. What mount did you use for the martin? I ordered one too.. bought a 42in cali raised led bar and their mount kit. I got the 40in cut out though on the diffuser

 

It definitely is much smaller than that, though there have been a few people here that had custom bent ones to fit the 52" bars.

 

Here are the mounts I used. You can order it from either CBi or Prinsu.
https://prinsudesignstudio.com/product/prinsu-light-bar-mount/

 

What size bar you have? And what bar

 

Rack is 47.5 inches wide, so you're gonna have to custom make the extender brackets. I think Zack might have made a few when it was a one man band, but I don't think CBI is gonna play ball.

Edit: Do you already have a 52"? My BD S8 is 40 inches and is MILES ahead of my friends 50" in terms of brightness and lux, despite the 50"er claiming more lumens. That's the downside with china light bars. There's no accountability to the brightness levels they claim.

 

41in Nilight single row from Amazon. Does the job for me.

 

Did you have to cut the diffuser any? I know he only offered 30in and 40in

 

Not at all. You'll have room with a 42in.

 

Usually a 41 or 43 inch light bar has a lens that is 40 inches wide, but they measure outside to outside at the bezel or the mounting threads. a 40" S8 is actually 43" at the threads I think?

 

You guys are awesome. This whole time i was looking for a machine shop to chop off an extra 2inches

 

The gap width for the 40" bar deflector is 43" btw. @geekhouse23 measured it for me the other day.