Keystone State Thread

Thank you for your service.

 

Every 5k I would rather be safe then have a problem later.

 

For now every 5K. Maybe an overkill, but hey!

 

I have a full Yakima Roof Rack system new in boxes I was selling, person backed out so I still have it

 

Me it's a Yakima completed Jetstream System new in boxes

 

This is what I have sitting in my garage as the buyer changed their mind.

https://www.tacomaworld.com/threads...ystem-2005-to-2019-toyota-tacoma-sold.579899/

 

I like the Browning 22

 

I felt the same way, but I recently was left with a 3/8s ratchet, no cheater bar and couldn't break the lugs. I left me realizing that if I was to be off-road and have a tire issue I wouldn't be able to change it out easily. I haven't had an issue with spline drive, but had an issue with the locking lug. I don't want to buy new lugs again, but I also want to be able to change a tire easily. Running into issues when you already have a flat is a good way to really lose your shit. At least me anyhow. I don't know why they just can't make a wheel with a little larger opening for lugs.

 

I don't want it for theft deterent, I just want to be able to change my wheel or tire easily. Spline just allows use of a regular socket, and for me a 1/2" drive instead of 3/8".

 

Daniel if you do that would be great. I'd even give you a couple bucks for it. How did your hunting season go? I got a little 8 in archery and a doe the last Saturday of Rifle. Still have a couple tags to fill with the smokepole.

 

I've been wanting to get this in stainless for bear.

 

I just prefer using thin wall sockets to spline. I've seen much higher failure rate on spline sockets compared to the thin wall. Also I'm spoiled because I carry a milwaukee 18v impact wrench with me everywhere.

 

Definitely a purchase I will make when I get my bumpers and sliders and actually start wheeling on a regular basis.

 

I’m using McGuard tough nutts, carry the correct thin wall socket and a 1/2” drive 24” breaker bar

 

I'm supposed to change my oil ?

 

I saw a reference to the

$37 F103N with LC-10 lever clip FN-Series Engine Oil Drain Valve, 1 Pack

F103N and

$37 F103S LC-10 Lever Clip FS-Series Engine Oil Drain Valve, 1 Pack

F103S for fumoto valves. Anybody know the difference between the two? Or why one would be preferred to the other?

 

I’m parting out my bed if anyone needs anything.

Located in Mahwah NJ 07430

Black Depot tail lights SOLD (pics later)

Bed stiffeners SOLD

Bed Mat (cut for extra D-Rings and spare tire strap) $30

High-Lift mounts (60” High-Lift only) with LED pods $40

Tailgate with camera $350

Bed $200

Tire strap and mounts SOLD

 

I’m liking the bed re-enforcers

 

OK the tail lights are either yours or @Blackout14 ’s

Not sure what to ask for just the camera. Let me look into it.

 

Those were scooped up by @uurx