YZZD3 oil filters on 2.7???

I have 6 YZZD3 oil filters left from my 2nd gen 4.0. Can I use these on my new 2019 2.7?

 

Yes

 

For years I have used Baldwin B-7020, which is a longer filter than either Toyota filter, but is the one Baldwin says is for my 2008 2.7 Tacoma 4 cylinder. I am thinking about going to the Wix filter that's called for on the 2001 Ford V-6 Mustang.
The specs. are exactly the same as the one Wix calls for on the '08 Tacoma 2.7, except that the Ford filter is longer, ie: more capacity. I've always equated Wix and Baldwin, except Wix uses neoprene where Baldwin doesn't, likely giving the edge to Wix. Both seem to use very similiar quality filtering media, have solid 'cans' and are well respected by over the road truckers.

 

yes ive used a case of 10 yzzd3 s on mine all good

 

Did you add any more oil for the bigger filter?

 

no I didn't, I used 5.5 quarts because that reads exactly at the full mark on the dipstick

 

Thank you for all the answers

 

If the oil is between the add and full marks, you are fine. People on these enthusiast sites often obsess over keeping the crankcase exactly, precisely, and perfectly full. It is so very unnecessary.

 

it takes 6.1

 

I know