What Have You Done To Your 2nd Gen Tacoma Today?

Do you have pics of the install?

 

I got military terminals but I’m not sure if I should just clip the end of the cable and recrimp or replace the whole cable?

 

My antenna housing was corroded and I had to drill it out to replace. What a ordeal! Next time I’m buying a new truck as I’m sure it will be easier. I hate being so mechanically challenged.

 

Found and fixed (temporarily) a hole in my muffler. Sealed the hole(s) with JB Weld and then wrapped with some high temp metal tape.



Any suggestions on a replacement?

I'll probably fail state inspection in May.

Not looking for anything loud, just a straight replacement.

 

Junk yard pick a part

 

Installed new rims and tires. Next up 5100s and OME 885s

These are 16” Method Double Standards wrapped with 265/75/16 Falken Wildpeak AT3s

 

Darn IKEA support beam didn’t want to pull apart. So I drilled holes in each end and attached one end to my Palo Verde tree & slowly pulled it apart. I’d like to take a moment to thank my sponsors,

Factor55 hitch block and d ring shackle
Husky ratchet straps
Milwaukee drill.

 

Daughter has the same bed what a pita

 

Good times in Ocotillo Wells!

Last one is in "Bed Rock" area, thought people would get a laugh from it.

 

Thanks man! They’re set on fourth notch I think.

 

Try posting in this thread
https://www.tacomaworld.com/threads/installed-d-rings-in-the-bed-pics.28533/page-36

 

First long road trip. TX to WV

 

Lol mine too Ikea the store of many parts.. lol

On a side note got my AVID sliders in today...

 

Added racks to the shell and legal tinted the front windows

 

https://areyouwearingmypants.wordpress.com/2012/02/28/what-my-ikea-bed-taught-me-about-life/

 

Anniversary of acquiring my dream truck. Buying a new intake and doing a burnout!

 

Did you do the seat mod? Just curious. Nice truck.

 

I haven’t done it! It’s my birthday your welcome to send me a set! Lol one olecoot to another

 

How does the seat spacer mod work for taller people? I'm 6'3" and have never been "comfortable" with the way the seat sits.

 

The carpet on the passenger side floor was damp. Took the windshield cowl off and checked everything in there. Everything looked good. The cabin air filter was bone dry. Shot compressed air into the air conditioner condensation discharge tube...nothing, no water came out. Looked up under the dash and couldn't see anything that was wet or looked like it had been wet. Pulled out the glovebox and cabin filter, dry. Cleaned out that little pocket in the front fender ahead of the front door. A few leaves in there nothing much. I'm at a loss as to where the water came from. After the holidays I'll get a hose on it and see what I see.