What Have You Done To Your 2nd Gen Tacoma Today?

Kdlinks x3 and weathertechs

 

What kinda stuff you planning on putting in there?

 

I hear those things end up kinking your tailgate cable and may eventually start rubbing the plastic off of the cable. Do you notice any issues so far?
I wish there was a way to incorporate the 3rd Gen tailgate dampener to the 2nd Gen.

 

Right on. That looks very practical. Does it sag into your view or can you tighten it up to stay above the rear window.

 

Added Meso's Gasshole

I first checked that I could remove the screw, as it seems some have had a rough time getting that out.








Thanks @mesojdm !!

 

Complete details here

Box and rack from the marvelous @Mr Marv and yes on the 10tw3

 

its a Kicker 10 inch comp c thin profile sub with a kicker CXA300.1 amp. I had to remove the back plastic from the rear seat and remove the 2 child seat anchors but it fits very nicely now.

 

Oil changed, fresh mobil 1 installed my new depo headlights siliconed the crap out of them fingers crossed they don't leak also got some ditch lights put on...just waiting on the wiring harness to come. Along with the wiring harness and mounts for the 32 inch that's going in the front bumper!.....been a long 2 days I need a beer

 

Thats what I always heard too. Only reason I dont have one yet....

 

Worked great on the 2015 really easy install.

 

Haven't had any trouble so far it does seem like it will kink the cable it even says you have to in the instructions. Don't think it will rub the plastic off though if it starts to i'll probably just put some tape for it to rub against.

 

Def wreaks the cable and you have to guide it to the left side so the gate will close properly.

 

Lights look great. Which ones did you go with?

Probably because they haven't updated their site since 2011

 

Thanks! I'm due for a new set.

 

Got my Sony XAV-AX1000 installed. The metra mount gave me a few difficulties but after a few tries the unit mounted up perfectly.

So far it sounds great. Definitely satisfied with it for the price. $280 from Crutchfield with hardware included. Just be sure to have some wire connectors as they are not included.

 

Added a new (to me) Lexus GX460 to the car line up.

 

New tires mounted.

 

Your truck has always been an inspiration for me since I joined this site!

 

Much appreciated!