Alabama thread!

I do this with my kickouts but I have TL problems so having a pivot point on tighter areas really helps. The most used part of my slider though is the 2x2 square under the cab pinch that thing gets beat like a redheaded step child.

 

Morning

 

bc i got no mobtown stickers

 

They are so naked looking without rear and front bumpers and sliders!

 

@stronghammer @JBTacoma

 

Sport Open Diff > All

 

so, if my PS rack is leaking...then what? I'm watching videos now about this stuff.

 

Make it not leak?

 

I mean like...does the rack need replaced...I can only find people replacing bushings, not seals

 

also...would this issue cause a "wobble" in my front end? at certain speeds my front drivers side wobbles like an SOB and I know it's not an unbalanced tire.

 

Plamsa Cutter will be in next Monday. I got it delivered to my brothers so I won't get to play with it for a while is only negative.

 

Happy new years everybody
https://youtu.be/c09rja06XBU

 

I can see how that would help but going up hills I wonder if it will push you to the side or make your wheels spin.

 

I would not think the rack would cause a wobble. A wobble could be a warped tire, warped rim or wheel bearing.
May be the same problem @InfernoChalupa had

 

I don't believe it is. It sort of comes and go's, not always an issue. At first I thought it was warped rotor, but it happens without the brakes. It usually only occurs above 45mph, and it's worse when I decelerate from say like 60 back down to 45.

 

https://www.tacomaworld.com/threads/rack-pinion-service-tools-tips.312600/

 

I saw that thread, I'd just replace the rack before getting into all that. Replacing the rack seems quite straight forward, just expensive to get one..

 

If it is worse when you apply your brakes to slow down it could be in the brakes.

 

no no, sorry didn't word that right. it's worse when I simply slow down, without the help of the brakes. meaning just letting off the gas.

 

It is not easy to replace on either