1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

V8 swap

Discussion in '1st Gen. Tacomas (1995-2004)' started by SeComa, Dec 30, 2018.

  1. Dec 31, 2018 at 4:06 PM
    #41
    SeComa

    SeComa [OP] Active Member

    Joined:
    Oct 1, 2018
    Member:
    #268013
    Messages:
    33
    Gender:
    Male
    So I had to fab my own mounts, alot of looking and thinking and measuring...I incorporated the stock mounts off the frame of the taco and welded up some badass mounts using the dampers from the donor with triple welds and square stock and 1/4 inch thick diamond plates to bolt to the motor, I then needed a trans mount so I used the stock mount off the taco and cut it up a bit to work for the trans with the 47...it worked GREAT!!! again alot of looking and thinking...with all the measuring twice cutting once the angle and pitch was an eighth of an inch off for the driveshaft which came off the donor as well, just cut down and rebalanced from the driveshaft shop...damn near perfect!!! Bolted right up to the stock rearend...one of the reasons I stayed yota to yota...then came the wiring and what a nightmare because the donor was a SUV with all the bells and whistles and my little truck was no electric nothing ya'll LOL...but I needed lights so alot of looking at diagrams and troubleshooting and then it all just kinda clicked...I'm a tech for KIA so it worked out ok-ish...but all my lights work!! I used the steering shaft from the taco but used the multifunction switches from the donor which now I have auto headlights and delay wipers and cruise control...which I didn't have before ever!...I had a huge pile of wires I didn't use and clipped a ground or two I needed..whoops! I have more photos...will upload asap!! It is a beast and shifts fine as hell...the donor had the ABS module which I couldn't use in my taco nor the wheel speed sensors...I post a video tomorrow

    20181020_085209.jpg
    20181022_201730.jpg
    20181027_162848.jpg
    20181028_142557.jpg
    20181028_151101.jpg
    20181028_174211.jpg
    20181205_214828.jpg
     
  2. Dec 31, 2018 at 4:24 PM
    #42
    2004TacomaSR5

    2004TacomaSR5 Nemesis Prime

    Joined:
    Apr 28, 2011
    Member:
    #55722
    Messages:
    5,081
    Gender:
    Male
    First Name:
    Jon
    Montana
    Vehicle:
    2004 Tacoma DCSB & 1980 Toyota Pickup 4WD
    Tacoma is stock and staying that way, Pickup is TBA as of now.
    Did they offer a trade in for a Turd Gen? LOL
     
    SeComa[QUOTED][OP] likes this.
  3. Dec 31, 2018 at 4:38 PM
    #43
    rblalliance

    rblalliance let the wookie win

    Joined:
    Apr 24, 2017
    Member:
    #217208
    Messages:
    2,698
    Gender:
    Male
    Vehicle:
    08 TRD OR DCSB 4X4
    That's pretty awesome that you did this!!
     
    SeComa[OP] likes this.
  4. Dec 31, 2018 at 5:25 PM
    #44
    36tacundra

    36tacundra Well-Known Member

    Joined:
    Oct 2, 2017
    Member:
    #231848
    Messages:
    460
    Gender:
    Male
    I like the diamond plate for extra horse power!!!
     
  5. Dec 31, 2018 at 5:53 PM
    #45
    RangeDrive

    RangeDrive Well-Known Member

    Joined:
    May 5, 2016
    Member:
    #186210
    Messages:
    268
    Gender:
    Male
    Vehicle:
    02 V6 Double cab
    Icon front end, OME Dakar rear, ARB front bar
    I’m down! Take my money!!!!!!............ but like, not joking !
     
    RianH15 and SeComa[OP] like this.
  6. Jan 1, 2019 at 7:50 AM
    #46
    SeComa

    SeComa [OP] Active Member

    Joined:
    Oct 1, 2018
    Member:
    #268013
    Messages:
    33
    Gender:
    Male
    20181205_202903.jpg
    So the radiator support was made by myself with aluminum bracing from Lowe's...Griffin Radiator26x19x3
     
    Biscuits, Holloman and BassAckwards like this.
  7. Jan 1, 2019 at 7:51 AM
    #47
    SeComa

    SeComa [OP] Active Member

    Joined:
    Oct 1, 2018
    Member:
    #268013
    Messages:
    33
    Gender:
    Male
    20181205_214812.jpg
    with an external trans oil cooler
     
    Biscuits, Holloman and BassAckwards like this.
  8. Jan 1, 2019 at 7:58 AM
    #48
    SeComa

    SeComa [OP] Active Member

    Joined:
    Oct 1, 2018
    Member:
    #268013
    Messages:
    33
    Gender:
    Male
    20181106_181725.jpg
    here is the pitch after a little measuring
     
    Biscuits likes this.
  9. Jan 1, 2019 at 8:05 AM
    #49
    SeComa

    SeComa [OP] Active Member

    Joined:
    Oct 1, 2018
    Member:
    #268013
    Messages:
    33
    Gender:
    Male
    So yesterday I was able to actually hook up a scanner to the OBD port and it read all the fault codes...I think there was about a full page of codes lol...I was able to clear all codes successfully, my CEL is on because there are a few things that aren't connected like the converters and O2 sensors etc... no biggie! This thing idles so smoove, you just feel the rumble lol
     
    Biscuits and Built2Ride like this.
  10. Jan 1, 2019 at 8:32 AM
    #50
    cruiserguy

    cruiserguy Well-Known Member

    Joined:
    Jul 31, 2016
    Member:
    #193416
    Messages:
    19,000
    Gender:
    Male
    First Name:
    Elijah
    SEKS
    Vehicle:
    2000 ext cab, 2.7L, auto, 4x4
    Baddest mini truck around:cool:
     
    SeComa[QUOTED][OP] likes this.
  11. Jan 1, 2019 at 8:41 AM
    #51
    Hobbs

    Hobbs Anti-Lander from way back…

    Joined:
    Mar 20, 2016
    Member:
    #181838
    Messages:
    22,351
    Yep…
    Vehicle:
    Rock Bangen', Desert Tamin', Gold Findin' Machine!
    Nice swap! I kinda want to drive it! :yay:
     
    SeComa[OP] likes this.
  12. Jan 1, 2019 at 8:53 AM
    #52
    Sreppep

    Sreppep Well-Known Member

    Joined:
    Feb 15, 2015
    Member:
    #148700
    Messages:
    550
    Gender:
    Male
    First Name:
    Philip
    Fort Worth, TX
    Vehicle:
    2001 SR5 4x4 V6 5spd 264k - 2005 T4R V8 4x4 139k
    5100/Toytec, F5s/w KO2 285s, ARB, 4x skids/sliders
    This would solve my 1st gen tundra itch.
     
  13. Jan 1, 2019 at 11:02 AM
    #53
    Plkyone

    Plkyone Well-Known Member

    Joined:
    Nov 3, 2018
    Member:
    #271563
    Messages:
    274
    Super Nice I love it Good work!!!!!!!
     
    SeComa[OP] likes this.
  14. Jan 1, 2019 at 6:16 PM
    #54
    tacomainthesun

    tacomainthesun Well-Known Member

    Joined:
    Jul 11, 2018
    Member:
    #258984
    Messages:
    743
    Gender:
    Male
    Vehicle:
    02(sold) 17 trd or
    Where’s the video?:confused:
    That is really impressive. This is what the sport taco should be.:cookiemonster:
     
  15. Jan 1, 2019 at 6:20 PM
    #55
    v8taco671

    v8taco671 Well-Known Member

    Joined:
    Apr 2, 2017
    Member:
    #215117
    Messages:
    156
    Gender:
    Male
    Same reason I put a 2uz in my 2nd gen
     
  16. Jan 1, 2019 at 7:34 PM
    #56
    970btu

    970btu Well-Known Member

    Joined:
    Mar 10, 2018
    Member:
    #246902
    Messages:
    462
    Gender:
    Male
    First Name:
    Ty
    Las Vegas
    Vehicle:
    99 Tacoma 3.4 5spd ext limited TRD 55K and counting
    OME, SPC UCA, ARB w/warn 10K winch, TG Rock Defense Rear, Marlin Clutch, Custom hi clearance under bed spare mount. 285/75/16. A ton of repairs done and a list up to come modifications.
    That is awesome!
    I love that you stayed Toyota
    I also love all the custom work and thinking to make it work yet look so perfect!
     
    SeComa[OP] likes this.
  17. Jan 2, 2019 at 10:07 AM
    #57
    KSDoubleTaco

    KSDoubleTaco Well-Known Member

    Joined:
    Mar 6, 2015
    Member:
    #150260
    Messages:
    75
    Gender:
    Male
    Kansas
    Vehicle:
    02 DoubleCab
    Nice work!
     
    SeComa[OP] likes this.
  18. Jan 4, 2019 at 3:09 PM
    #58
    SeComa

    SeComa [OP] Active Member

    Joined:
    Oct 1, 2018
    Member:
    #268013
    Messages:
    33
    Gender:
    Male
    sorry all..it's literally been raining here for 9 days so I will get a video up tomorrow
     
    Biscuits and ImplicitlyAlberta like this.
  19. Jan 14, 2019 at 1:16 PM
    #59
    SeComa

    SeComa [OP] Active Member

    Joined:
    Oct 1, 2018
    Member:
    #268013
    Messages:
    33
    Gender:
    Male
    It wont let me upload a video
     
  20. Jan 14, 2019 at 1:23 PM
    #60
    Wulf

    Wulf no brain just damage

    Joined:
    Jan 30, 2015
    Member:
    #147523
    Messages:
    61,578
    Gender:
    Female
    Vehicle:
    rock raisin
    You'll have to upload to youtube then embed it in your post using the Youtube url

    upload_2019-1-14_16-23-17.jpg
     
    Jerry311SD likes this.

Products Discussed in

To Top