The Florida Classifieds

Yes, still for sale/trade

 

There is a set on facebook marketplace in Ocala for $300, not mine but I saw them today, PM me and I can share it with you if you are still looking

 

Hey all, have a few things up for sale...

-5100 with ome 887 springs (set at first notch) and one has 1/4” spacer for driver side, they are assembled and ready to put on the truck.

-5160 rears, come with the billet aluminum mounts instead of the hose clamps and plastic spacer.

Wanting to get $500 for the whole set, they have 3,500 miles on them, id prefer to sell as a set for now, thanks!

 

Sent you a pm

 

Is the 887 springs to stiff for my stock bumper setup? I was told 885s or 886s I think? I would be interested depending

 

887 is the same stiffness just a little taller.

Coil specifications:

• OME 883: 375mm in height, 590 pound spring rate
• OME 884: 390mm in height 590 pound spring rate
• OME 885: 395mm in height 590 pound spring rate
• OME 886: 402mm in height 660 pound spring rate
• OME 887: 400mm in height 590 pound spring rate
• OME 888: 405 mm in height 590 pound spring rate

 

Gotcha awesome would I need to add the rear spring lift to make it level?

 

Yes if you used an 887 and stock in the rear you'll have a 'bro lean' and your front will be up higher. If you use an 887 in the front you MAY need some new UCA to help with alignment.

 

Oh well thats not what I really wanted....I wanted to keep it stock with the Bilstein setup....Damn

 

Hey! The 887 is the same spring rate as the lower numbers of OME, 883,884,885 as KaptainH posted above but it is a longer spring. My truck has stock front bumper as well, it raised the front a true 2 inches. Leveled it out good, mine is a 3rd gen 4x4 so I’m not sure if you would get the same results. I also didn’t need UCA’s to get alignment

 

Well if thats the case then I might need those

Who is close around me to tell me what my setup is so I will know?

 

Saw that... pretty tempting

 

What part of Florida are you located in? If you don't mind me asking, how come you want the predator step bars over the cast aluminum running boards?

 

I like the way the predator looks. I will miss the door ding protection the OEM running boards provided though. I'm in Pinellas Park

 

I’ll take them. Sent you a pm.
Jim

 

I can help with function and door ding protection.

 

I need some door ding protection! What do you charge for things like that? It's a new DCSB.

 

350 for ones that are on the right but square main tube and 400 for the ones on the left

 

Thanks for the fast reply. Nice looking work, too.

Are those prices installed? Bolted on or welded on? Painted? How much lead time do you need?

 

A week or 2, I include the install on them and only offer weld on. Painting can be done but for extra