209 TACOS - B/S and shenanigans

I grabbed these from the exhaust reroute thread:

 

I haven't done mine yet (still waiting for the skids from Jerry), but have already been to a shop to discuss.
They wanted me to bring it back once I had the other skids (mid and TC) to make sure clearances were all good.
We came to the conclusion that the Y will have to be relocated toward the rear, and clocked a bit to accommodate the new route of the driver's side pipe.


For me, the Y is too far forward to get this done:


Sorry, I don't have pics of mine to show, but the idea is to just remove a section of the pipe after the Y, to move it back, then add pipe to both sides before the Y.
...also, mine isn't clocked like that, it's more where the pipes are on top of each other.

 

If anyone is still interested in getting their HAM license there is an event coming up on February 16, 2019 in Motown

https://bit.ly/2LMstqJ

 

Do you even communicate?

 

Still I CAN’T understand women

 

Just took a couple pics...




So you can see (at least on my '15) that to route the driver's side pipe behind the TC, the Y section and flange need to be moved back.
...oh, and the Y needs to be rotated a bit too.

 

Picked something up on the way home from the airport today.


Gonna take a little bit to freshen it up but I think it's going to be a nice addition.

 

Mitchell Mufflers said they can do it on Saturday morning for around $100. Seems kinda low, the other thread they were talking about $200-300.

 

Take it brotha!

Leave em a $20 tip if you feel bad.

 

Fuck no I need that $20! Them switches are expensive.

 

At 20 a pop they start addin up quick.

 

Was great meeting you and your son. Thank you again for the tail lights. Checking out the brewery for dinner and drinks headed back to visalia tomorrow. No luck on finding a place yet. But will soon hopefully lol

 

Renting or buying?

 

That’s not too low. I remember being quoted at $80 on 9th street, for the exhaust reroute.

 

Happy Birthday @roguegs
eh names close enough
https://youtu.be/XeBJLzX4gGk

 

This.

It's really just three cuts, then welding on one straight piece of pipe, and one with a couple bends in it.
I wouldn't expect to pay any more than $150. In fact, once Jerry let's me pick up my new steel, I may just drive down to to this spot.
(I've got some Casa Sanchez Cremosa *cough* @lucky13don *cough* I need to pick up down there anyway)

 

lol everyone is addicted to that salsa!

 

https://www.youtube.com/watch?v=l417iA7iQeo

Happy birthday Angela!

 

haha, Angela!


@roguegs