New England B.S. Thread

Yeah, if you put enough water through it, it should work. Don't get in the back until you're sure it's rinsed properly though. High pressure water and steam can act as an aerosol and put all that nasty shit into the air for you to breathe in. I don't know how bad the back of this thing actually is, so I'm likely exaggerating the effects.

In all seriousness, that ammonia and bleach mixture is exactly the type of result you want to avoid by mixing chemicals. You don't want to be unfortunate enough to accidentally find the next ammonia and bleach mixture! Water is a universal solvent and, with enough of it, it should dilute and rinse away whatever nasty crap is still in the cap.

 

Go find an exterminator's forum, make a profile, and ask what to do. Forums are really the best part of the internet for this reason.

 

Welcome, Bro...greetings from the Wet Coast of The Great White North....

 

its not super bad. the shelf is the worst thankfully- its got powdery stuff in there that looks a little sketchy. im gonna jist blast the shit out of it for a while and see what happens, then wipe down with simple green. shouldnt be too bad hopefully!

 

Can anyone tell me if the wire clips for the headlights be used on either side?
I have a clip in lousy condition

 

hey is it illegal to have the brakelight not connected on a truck cap? not sure when i plan on connectin it because its so cold out

 

Morning. Haven't been on much lately, insane at work. This week is going to be rough, 5 day work week.

 

In short, is you have one on your truck, yes.

That said, I had a utility cap on my Cummins , never hooked up the high mount light until the inspection station mentioned it.

YMMV....

And yes... Monday...
Starting my on-call week this morning.....

 

Technically, yes, although I doubt that would be a reason you'd be pulled over. That said, it would give a cop a legitimate reason to pull you over if you look like you're up to no good and they want to have a look at you. You can do a quick, simple set up and temporarily make a plug that goes to your trailer plug.

 

Morning NEBS Thread

 

Morning all. Happy Monday, to the first full week since the middle of December... Urk.

 

Yup and get ready for a long time without more time off. Unlike those teachers! @ERMB @DrFunker

 

Yeah, even last week felt long and it was 3 days. This week is gonna SUCK

 

Yep. I had a day of vacation time left that I had to burn, so I took off Friday the 21st to do some X-mas prep. Then they gave us the 24th and 25th off, and the 1st. So I haven't worked a full week since the week of December 9th. And I'm working this Saturday, too, so I'm rolling back into a full week plus extra

 

Welcome! I've been to the shop in Bow to pick up springs/shocks- cool place.

 

Hi Nuno!

Ponds freezing at all down your way?

 

Yeah it really sucks up here in the boonies. Haha

 

Morning all - it's monday... zzzz

On a lighter note two new-to-me-but-used axles come in today to use as trail spares.

 

oh i didnt even think of that... that is definitely a good option because the cap will be on and off fairly often i think. ill look for threads on how to do it. thanks!

 

No, they live in Beverly Hills