What Have You Done To Your 2nd Gen Tacoma Today?

Not sure if i took pictures when i did a temp install of a 50 curved i had when i first got my prinsu, but it really didn't look good... still trying to sell the damn thing..

 

Yep. Familiar with it. Just didn't feel like spending $130 on them. It supposedly stops the squeaky corner noise that some of us get as well. I fixed that one too.

https://www.tacomaworld.com/threads/cross-wind-whistle-kazoo-noise-tsb.498774/page-4#post-19538031

 

I prefer to have mine in the middle. Seems like on the trail it's usually my passenger thats handling the comms.

 

Stuck, is your truck 2 wheel drive?

 

Barely beat me to it! Just hit 49k on my way to work. Also a 2014

 

Thanks for digging that up!

 

Pls I need advice on this. I just bought the truck and I checked this lift l. The left side is more lower then the right side. Pls any help on how to get this higher to the same leve to the left side. Thanks.

 

It looks like you have a Firestone ride rite set up. There should be a fitting somewhere to add air. If you can find the air line that goes into the air bag, it should lead you to a fitting. I am assuming the previous owner didn't splice it into an on board air system.

https://www.amazon.com/Firestone-W2...94&sr=8-1&keywords=firestone+ride+rite+tacoma

 

Showlow backroads, then a thorough detail... as I do. These Cooper STT Pros did great in the snow and I didn’t even air down. First time taking them in snow.

 

Installed a Total Chaos bed stiffener

 

A lot of times it’s in one of the license plate bolt holes on the back plate

 

What PSI you rolling around at?

 

PID: 2182
Unit: Fahrenheit
Max: 300
Min: 0
Scale: x1
Unit Type: °F
Equation: ((((A*256)+B*(7/100)-400)/10)
Header: Blank

I only did pan temp.

 

I run them at 33psi but when I’m “wheeling” I go down to 12psi. They’re incredible at 12 off road. Just incredible.

 

Thanks. I have mine at 31 but also have about 200lbs extra up front. Trying to figure out where I want them.

 

https://www.costco.com/Champion-10,000-Pound-Winch-Kit.product.100412085.html

 

Ive been needing to do this for awhile now. How hard was it to do? I ordered the new little DC motors

 

Just picked up this used (new to us) bed topper and even scored a set of running boards!

 

New auxbeam "fogs".

 

No its a 4WD. I wouldn't have made it that far if it was 2WD.