OEM Running Boards PT212-35053

This weekend I will be getting a used set of these for my 08 Access Cab. The owner does not have the hardware to attach these. I know I need 3 bolts per side, anyone here have any idea the diameter and lengths of these bolts??

 

funny, I just did the same thing, its actually 6 bolts per side. According to the OEM install guide, it requires M8 X 1.25 bolt- 25mm length.

I used these from Home depot:
https://www.homedepot.com/p/Everbil...-Steel-Flange-Bolt-2-per-Bag-802608/204281415

I also referenced this guide from sparks toyota:
http://toyotaparts.sparkstoyota.com/install/PT212-35055inst.pdf

 

Damn I would love to find a set of those used. They look so much better than the tube steps IMO. What did you guys pay for them?

 

Thank you very much for all of that information.

 

It looks like you can get a set for around $200-250 new online, just punch in the OEM part number into your search bar and see what pops up.

They look nice because they're tight to the body and have a finished look, as opposed to tubes. some cons: very tight to the body so you only really use the outer half of the step and the fascia is plastic so its not very grippy. it could use some grip tape

 

What's the OEM part #?

 

It's in the thread title

 

The Access Cab ones are a bit harder to find as they're less common than the Double Cab ones. I bought my Double Cap set from a member here for $100. I would think you could source a used set somewhere int he $120-150 range quite easily if you don't need to purchase new ones.

 

i
I am getting the set for $80 bucks, but I do have to drive an hour to get them.

 

Here's mine!