What Have You Done To Your 2nd Gen Tacoma Today?

Looks good, thanks for posting that!

 

Thank you! Not bad guesses. The top pic is a couple miles from my property in Mosier, Oregon. It’s east of the cascade crest and botanically very similar. Bottom pic is still in Oregon, but barely. Deep into the Kalmiopsis Wilderness, maybe 20 miles from the California border. The burned vegetation is from the Klondike Fire, which burned what came back from the Biscuit Fire.

 

For me it's the only way ...

 

Thanks hopefully more mods soon

 

I believe I only had to cut the drivers side off.

 

I’m running KO2’s 265/75/16 from fender to center of hub I’m sitting at 23” in the front and 23.5” in the rear.

 

Perfect! I am going to be running the same size tire in the Falken Wildpeak A/T3W. Looks like I may be going 4th notch instead of 3rd

 

Like the stance of your truck, I'm looking to upgrade suspension soon. What coil did you go with?

 

Yeah I’m pretty sure the KO2’s are a little more agressive.

 

@Plain Jane Taco Had some pretty high winds here today. I did get out on the interstate and your Vacuum line trick has solved my problem. Many thanks for the cheap and easy fix to a pain in the ass problem

 

Was it difficult to remove to paint?

 

35% tint all the way around, including over the factory rear tint.

 

Used it to do a little unicorn spotting...

 

holy cow

 

This previous weekend with help from @little squirt we got my Spc UCAS and new headlights installed. Hoping to clear up the lenses a little bit this weekend.

 

Fineto! Welded up the cross member to the plates for the hammer hangers installed with some stainless fasteners, courtesy of work and installed the b110’s @EatSleepTacos

 

The square tube looks awesome! Nice work

 

Thank u sir, u were my inspiration!

 

The ones that came with the 6112

 

Finished up some stuff on my LED accent light install and switches. Cleaned up a lottt of wiring too.