What Have You Done To Your 3rd Gen Today?

Got this installed today , but i might change the vinyl from the hood scoop, i was expecting the get the same one as the trd pro thats blacks out the hood scoop completely.

Here you can see the difference

 

Got my Christmas present hooked up finally!! Putco Blade
https://youtu.be/3CQcnrpYFn0

 

VERY nice....that is the next thing I absolutely have to do; growing weary of holding my Surefire betwixt my teeth to do anything

Dumb question (maybe) for anyone....are all the 3rd gen interior lights the same? that is, will the package for a 2016 work on the 2018?

Truly beautiful....

 

That is really cool....it doesn't interfere with the access hole for the spare tyre?

 

Yea should be the exact same

 

Copy, thank you much

 

It covers it a little bit but I should still have access

 

Cool, thank you...it looks fantastic, and i wanna do it...was just worried about the spare....

 

Use tape in the middle and you’ll be good

 

I think that folks will want a link to this with electric connections.

 

Yes, used silicone to seal the blue screws.

 

First mods done yesterday. OEM bed mat and the cast aluminum running boards. Not really crazy mods but its a start.

 

I have an OPt7 bar. They are quite similar, however my opt7 has sequential amber turns.

To the point, I used a plastic "Velcro" to mount mine. The stuff I used is much like the Command Strips Velcro, meaning both sides are plastic. Recently I has a flat and I was able to change the tire in less than 15 min. This included pulling the bar off to access the spare and replacing it (it was still connected via wiring) after completing the mounting of the spare.

The bar had been in place since March 17. I was able to remove and replace it easily and no one would have ever known it was removable.

 

I popped mine off and just hit it with like 8 coats of PlastiDip. I plan to get the vinyl behind the scoop like you have.

 

Everett - First off Thank You for your service! What do you mean by a bed step? I'm not familiar with those.

 

It bolts on the frame, left rear. Tried to post one from BAM Wholesale Parts but it would not let me for some odd reason. But this is what I'm talking about.

https://www.ebay.com/itm/TOYOTA-OEM...=item41be38307f:g:INwAAOSwfVpYpxh3:rk:10:pf:0

 

$290 Putco 92009-48 48" Switch Blade LED Tailgate Bar with Power Wire Modification

https://www.amazon.com/Putco-92009-48-Switch-Tailgate-Modification/dp/B071SH7LSL

 

Just put the hook in to lower the spare. No issues

 

Agreed. I like it too