WHAT UCA S ARE YOU RUNNING

I went TC because it was a sure thing, but thought the Baja Kits looked cool. I thought conventional [urethane] bushing etc., was more streetable than joints and uniball, but what do I know. I think those Icon aluminum ones look bad ass.

RZ Rob

 

My BP-51 kit had SPC UCAs thrown in. I like that the factory ABS bracket bolts back up to it. Not a fan of "just zip tie it".

Plus lots of caster options.

 

285/70r17 ridge rappers

 

Thanks you just saved me money on ucas.

 

I have the 2nd gen TRD Pro suspension on a 3rd gen, I am running 285/75r16 on Tacoma Pro wheels I have no rubbing at all when turning or driving on the street.....the problem is when going off road my tires rub on the UCA’s when they get stuffed, will simply replacing the stock UCA’s to aftermarket help me or not really?

Not looking to buy new wheels, wheel spacers or down size in tires

 

I have the JBA UCA's but am upgrading to the ICON Delta Joint UCA's

 

Why? What has been your experience with the JBA's?

 

Great just trying something new, upgrading everything actually. Kings Front and Rear Extended Travels, new OEM LCA's with Whiteline Bushings, an new alignment cams.

 

SPC (LR) UCAs with 887 springs and 5100s

 

Had 2 different sets of the SPC LR UCA's years ago when they were failing or the bushings were defective. Never went back to them, had Camburg Ball Joint UCA's was really disappointed in them. Been on JBA's for over a year now besides the rusting Ball Joints that he replaced for free, and red powdercoating chipping off they are nice. So trying something new again.

 

As far as I know that was an issue with the original design due to the double washers seizing to the arm and cracking the welds.. they switched to a single washer and different bushing design to correct the issue and recently switched to a cast design.. I just installed the newest design recently and have no issue.. A buddy of mine has been running the single washer version for over a year now with no issue either

 

Delta joints.....

 

I prefer the arms with built in Caster as some shops have no experience with the LR arms

 

Find the right shop and tech then stick with them.

 

I have black and silver stuff....

 

Hah, and I have the cheaper, more tubular-er, dirtier black and silver. Still works pretty good though.

 

I have the same Icon UCA. I'd recommend investing in the uniball cap... supposed to reduce wear. Not a huge investment for $40.

 

I ran Camburg uca on my 2012 taco. Great overall but a lot squeaking. If you’re hardcore off-road definitely. Street rig I would go with another style.

 

Wow. That looks amazing.

 

Are the caps the same as the new Delta Joint UCA's? If so I have a set new in packages I will mail for free as I won't use them.