Does anyone know how to remove the center seat belt

I have a regular cab tacoma and want to remove the center seat belt it is easy to remove behind the seat but there is a little buckle that attaches it to the floor and I need to undo this little buckle Please someone help. I have my entire interior ripped out need to deaden before monday

 

is the part that connects it to the floor plastic?? kinda like a shell??

 

can you take a pic real quick and post it?? if i can see what it is, i can probably tell you how to get it out.

 

thanks for the support guys it means alot here is the pic taken from my phone

 

there should be bolts that hold both sides in place that you will need to remove to get the seat belts off. you may have to slide the seat forward or back some to get to them.

 

I just want to undo that little buckle I know you prob can because gsm has taken out his seat belt

 

if there isnt a button, maybe take a flat tipped screwdriver and see if it can be unsnapped apart. may be about the only way to do it.

 

I did this to mine right after I bought it. Simplest way is to get a small screwdriver or pick and separate the plastic shell. I depressed those two little buttons and away it went. It's been a while since I did this, so I apologize for the fuzzy details. Poke around like I said and you'll get it.

For the life of me, I can't figure out who would want to sit there anyway

 

thanks guys I'm gonna give it a shot tomorrow

 

http://www.tacomaworld.com/forum/2n...ing-middle-seatbelt-bench-seat.html#post95099

 

This link did it. I just drilled a little hole it worked like a charm. I appreciate everyone chiming in with suggestions. I appreciate it. You guys rock

 

thanks for the pics and info. just did it myself, and you are right, im not sure who would sit there, other than an infant midget......no where to put feet and legs?? oh well, i dont use it, its done for!!! thanks again

 

You still gotta take me on my first mud ride some day