Bought OEM Tonneau Cover, Looks like I missing correct bed rails.

Purchased OEM tonneau from someone on CL and have all latches and supports but no bolts or front plugs. Does anyone know these bolt sizes? I also figured out very quickly that I have non Tonneau cover bad rails therefore the cover will not work. Does anyone know the part numbers for rails and front plugs and cost? I am sure I could just cut into existing rails but if the right rails are reasonable I would prefer to just order them.

 

Dealer should have the bolts, the bed rails are just cut.

 

I think those bedrails are like $200. Just cut them. Someone priced out the hardware. It’s not cheap either. Search function for the thread. If I find it will link it for you. Hope you got a good deal on it.

 

Here are the part numbers. Good luck

 

Call back the CL seller and trade him for your rails and hardware. Bring tool for removing sheared bolts. (stock bolts suck, but brackets are expensive.)

 

I bought while on road trip so really not feasible. Thanks for all the info !

 

Need to

Need to resurrect in this pic I don't see actual OEM tonneau cover bed rails that have the cut outs needed for locking post. Does anyone have this part number?

 

Just use a Dremel to cut out where the bolts go and save yourself some money. I think they are around $200

 

There are notch marks on the underside of the bed rail caps, sharp razor blade or dremmel tool.

 

Cutting your stock rail caps will be the easiest. KB Voodoo also make steel caps that you can order with the cutouts:

http://www.kbvoodoo.com/shop/toyota-tacoma-bed-side-rail-cap-system-short-bed-fits-years-2016-2017

 

Thanks All!

 

You called it very simple used heat gun exacto and Dremel.