ECGS bushing?

Am I the only one with a lift for over a year and has not replaced this? I dont feel any vibe or sloppy play.
Am I missing something?
Should I just do it?

 

40K miles, 3" lift with only 300 miles on the clock. No problems here and I wheel my shit too.

 

Same deal for both gens?

 

Can do it now or later. It will likely break eventually.

It’s like $80 in parts and tools (can borrow the puller) and 2 hours of work.

 

It's the same ft diff.

 

I did the bushing when I installed my lift, since I had it apart anyway. Some guys don't get the noise after lifting, but for me it made sense to spend a little money at the time (~$90 for bushing and puller tool) and only have to disassemble the front end once.

I don't know what the likelihood is of the factory bearing breaking. Probably depends on the height of your lift, and whether you did a diff drop kit to bring the CV back down to/near factory angle. If you're not getting the noise, you may be good to go for a long time.

 

Turn up the radio and drive it until it breaks!

 

i just did this as a "eh, might as well"

 

Ive got 2015 lifted 1 3/4 up front. had the vibration and installed bushing. took care of vibration fine. but if you dont have vib well others my have better input but if you do it works!! Luck!