DomeRock Module for Courtesy Rock Lights V4 by DSIM Solutions

Different thread.

 

Got mine in the mail and it’s solid. Very nice to get creative, quality items from the boards. I’ve been tinkering on my vehicles for as long as I owned them. 10-15 years ago if you bought a custom electronic from a guy it was big, bulky and pricey. Now you get quality pieces like this for reasonable prices. I love advancements. Thanks again.

 

Thanks for the kind words... Worked pretty hard on these.

 

For my Switchpro guys, I have joined you.

Just confirmed that my module does work with the switchpro WITHOUT a diode. I am going to "officially" recommend a diode still, but take it for what its worth I am not running one.

Just an overall update as well. I have been SWAMPED lately with work. Although I think I have nailed down an enclosure for V3. Expecting to have a first batch of these middle of January after some holiday/pto time.

This new design will take me a fraction of the time to put together. So I should be able to dish out new batches rather quickly moving forward. This was a long time coming. I'm officially taking the smarter not harder approach, with same functionality.

Stay tuned.

 

subb

 

Have you squished an etc any time module into the same box an all in one thing would great the less the better

 

This thing is sweet! Great communication fast shipping very easy install. I didn’t use a ch switch (have not decided what type of pod I want...) it was very easy to tap into the ampper switch I got off of Pwalnuts build.

“https://www.tacomaworld.com/threads...ts-reverse-lights-and-footwell-lights.520355/

 

Noob question. How do you tell which yellow wire to tap in the a pillar harness. I see two yellows.

 

Not a noob question. There are several in that harness. I think post 42 had a pic of which wire it was.

 

This one?

 

Took a chance and that is correct. All hooked up and working...let's see if it still works after I put all the panels back lol

 

Yeah sorry I just put my harness in the same direction as the pic in post 42 and chose that one. Then I tested everything out before i closed it up

 

Is the harness available for sale?

 

Just an update guys. I have proven out the new design with a different board and finished up my enclosure.

I am working with @mesojdm to start getting a t-harness so this will be totally plug n play. No splicing of factory wiring in the a-pillar, simply a tap to your existing rock light setup and good to go. Probably a week or two out from starting these guys back up again.



Stay tuned

 

Will your T harness be able to incorporate Meso new puddle lights?

 

You'll be able to run both at the same time with a splitter. As I plan on doing.

A simple JST Splitter will work. Readily available, I may end up stocking some as well.

 

I may end up changing enclosure design so it can stay housed up in the apillar close to the harness. Need to see if there is enough room. Gonna take a look at that this weekend.

 

Will these work on 2nd gen?

 

Yes but the tharness will not.

 

Planning on making one or would I need to fab my own?