What Have You Done To Your 3rd Gen Today?

Added the CaliRaised Faux TRD Pro Grill today in the snow. Also have the Kobalt 12V air inflator from Lowe's I'm going to be working on wiring up to a switch.

 

What tires do you have on with those wheels? Looks good.

 

Nice. Like the Don't Tread on Me plate.

 

Added a cap!

 

I was just looking into it and noticed that auto on front cam- I really like that. This mod has went from eventually to top of the list. Just last night I was pulling up to the gas station and it had the poles in front (obviously lower than the hood) so I was inching up and bump sob. It wasn’t bad but still irritated about it, had some paint transfer I got off today. Need to buff it good

The only thing I’m trying to figure out now is if I can wire up this kit with a different switch. I really like the new switch available from “anytime backup” it has 4 wires going to it (12v/ground/front cam/rear camera) do you know how many wires were going to the included switch? I wish I knew more about electrical to figure this out

 

I will once it's in. I didn't get the nav override though.

 

I got around to installing my SwitchPro 9100, and my Baja Designs S2 Sport lights! Mounted on Rago brackets.

 

You've inspired me. Thinking about switching things up from my bed divider now.

 

Replace it with a blackout mbrp or something to your liking

 

Axle dump it

 

That's what I did for my Rubicon and the improved departure angle was excellent. I'm really not sure how I want to route the Taco pipes, though. That's probably an entire month of research I haven't started just yet.

 

sorry im a noob with electrical. is this where you connect all your aux lighting? is this the aux fuse box?

 

Yes to the first part, essentially on the second part.

 

I need a clean up kit like this...I have at least 6 aux harnesses and a rats nest of wires...I don’t even know where to start...where did you get this rainbow of simplification I keep seeing in peoples pics...and did you install it yourself or is this a pro job?

 

A Switch pro 9100 is a customizable switch panel with a distribution panel. A Power tray is a distribution panel but you need to use your own style switches.

 

paging @Mr.PowerTrays

 

Kept this mod simple, it was needed. The stock knob was way too light for my liking. FJ knob with a 1" grommet holding the shifter boot trim in place.

Trying this tomorrow with a 1" grommet! Thanks for the tip!

 

So i have ditch lights and bumper LED bar, both have the wiring harness. If i got this kit i use the wiring harness they gave me with the lights and with some work i connect them all into this switchpro? there a lot of splicing i assume?

 

Nope, not a ton at all. Hot goes to a bus bar that goes to the switch-pro, cold goes to a cold bar that gets grounded.

here:

https://www.tacomaworld.com/threads/bkf-build-and-shenanigans-thread.544105/#post-17616766