What Have You Done To Your 3rd Gen Today?

Would you suggest a tray for that or just mount on the fuse box cover?

 

No need for a breaker since all of the circuits will be fused.

 

Came here to say this. You could either go with an all-in-one solution like the SwitchPro or SPOD, or you use the switches you already have with a DIY fuse+relay box of some kind. Here's an example of one I found on the net for ya:


You then simply figure out a way to mount that under the hood and you're done.

Good luck!

 

Yea, you have at least 4 power supplies going to the battery I can see. Definitely need something. Until then it's amazing what some cheap wiring loom can do to clean it up a little.

 

Ty

 

That's your call.

 

Well good sir...I must say you have opened my eyes up to this whole thing. Thank you and others for the input...def gonna look into this...y’all are the best

 

Took it off road and got it dirty

 

I plan on doing the dump and a reroute for skids. Also gonna see about getting my oem chrome tip on the exhaust where I cut it.

 

Installed some AVS in-channel rain deflectors and slapped some black lettering on the tailgate.

 

Installed Baja Designs S2 Sports Wide Cornering (flush mount). Followed existing wiring harness, along the frame to the engine bay. Connected to Switch Pro-9100.

 

What size tires are you running? Your truck looks good!

 

This is exactly why I got the front camera. This is the switch I purchased to put on the left side of the steering wheel for the larger slot. https://www.amazon.com/CH4X4-Push-S...FMwebp_QL65&keywords=ch4x4+toyota+push+switch
It has 4 wires (front/rear camera, 12v, dome light, ground) the beat Sonic came with 3 wires (front/back camera, 12v, ground) regular size switch for the center console.
The relay included in the beat Sonic allows it to cycle through the cameras when you press the button the extra red wire (red2) on the new switch is to light up the switch when you turn your lights on at night. I believe the anytime camera doesn't light up unless you are using the camera when pushing the button same goes with the regular size switch included with beat Sonic (3wire). I like the look of the new switch as it matches the other switches when the lights are turned on and I didn't have a choice because I ran out of empty regular size slots in my center console. The is a dual pole switch which means when it's pressed it stays hot until it's pressed again to turn it off. The included switch that beat Sonic includes is a single pole which means it's only hot when you press the button, once you let go it's off again. Keep that in mind when cycling through cameras or programming it. You will need to press it twice (on and off) to cycle through whereas the included switch you only press it once every time you want to switch cameras.

 

Where you get the color match? Dealer or random shop? Matte blacked all emblems and swapped grille for pro, now just need to do the back. Dont like chrome.

 

Look at S-Tech based out of Denver. I didn't want to pay SPOD or Switchpro prices and stumbled onto them and now use the 6-switch kit in my truck. Very simply setup that will clean up that rats nest.

https://stechswitch.com/product/s-tech-6-switch-systems/

 

Well the dealership called after we got home with my girlfriends 4Runner and said he would have my truck later. So when I got home with it , it was dark. Traded my 2016 SR5 in and got a 2019 TRD Sport 4x4. Luckily I took off a lot of mods I had on my other truck. Now I get to start all over.

 

I second this!

 

Looks great! What rear bumper are you running if you don't mind me asking?

 

Kicker tweeters and subdued ‘Merican flag.

 

Finally just got my Kings from Filthy Motor Sports, Ben is awesome. Learned a lot from his YT videos and he set me up for my DD to off-road set up with its drastic weight changes. Waiting on my HD Deavers now....