What Have You Done To Your 3rd Gen Today?

Added decals from CBoy808 to my Husky Liner X-ACT Contour mats. Front and rear. Looks great with my new Clazzios.

 

Powertrays makes a great product to mount everything on. I went with a blue seas set up with a circuit breaker..
@Mr.PowerTrays

 

Man, I am really digging this. I would do this to my WeatherTech Mats. Love the seats as well, what did that end up running you for the seat covers? How does that work, you have to take it to an installer right? Its not just a cover its a whole replacement?

@CBoy808 I'm going to PM you on this decal.

 

Yes they do!! I use their products as well and they are very well made and very convenient.

 

yep.. Powertray is a necessity! Haha.. my setup is the 12 block blue seas. Essentially you can use it for 12 mods.

 

You just grab that sucker (the stock cig lighter) with pliers and pull it out the face of the bezel and I broke apart the stock wire fittings to preserve as much wire as I could because theres not a lot of slack. Then attach the wires to the poles on the USB adapter however you see fit (I just wrapped the wires on the poles and wrapped them tightly with electrical tape). Lastly, if you get an adapter that's the right diameter you just shove it back in the hole. I think its 1 and 1/8", and the blue seas one I got was a threaded nylon body that fit plenty tight, enough that I wasn't worried about using the threaded washer behind the bezel. This worked for me, no problems 9 months later and no scratches on my plastic.

 

Do you guys know if these trays work without issue with the redline hood struts

 

I installed the OEM roof rack and we went paddle boarding.

 

Let me know if you are ever interested in switching out your OEM Lower 3 hole switch panel for a OEM Lower 5 hole switch panel. I just removed mine and have it for sale. Just make an offer and you definitely won’t have to buy it for the OEM price of $150. Might make it worth it later on down the road for more mods.

 

This is a great setup. I just installed mine. Super easy and works great

 

i was curious how the red stitching would look...looks awesome!

 

Those look good. Do the AVS stickers come off, or is the branding etched into the plastic itself?

 

Non-acetone fingernail polish remover will wipe it right off.

 

Yep!! I have the struts too.

 

A little late on the post, but a trip up North before the snow came rolling through.

 

HEADS UP !
SEAT SPACER MOD.
Starting Feb. 1st the price will be $10 each and not the $7.50 materials have gone up. I think I have enough in stock till then. So your cost after Feb. 1st for one seat will be $27 without bolts or $32 with bolts and that includes $7 shipping. For both seats $47 without bolts or $57 with bolts. Sorry but not making much as it is and have to go with the flow. Thank you

 

we bout to make a change in here. threw on some new wheels and tires for a quick shoot if weather cooperates.

 

That does help although wiring the switch https://www.anytimebackupcamera.com/product-page/FRswitchtoy seems slightly different. From the pictures it does look like it will light up blue with lights on and then when you select the front cam (pushing top of switch) an additional orange indicator lights up and same for the rear camera that has its own orange indicator (pushing bottom of switch). Whereas your new switch has the front and rear cam wire as one, this has 2 separate wires.

Do you think I’ll still be able to use this switch/wiring with the beat sonic kit? I have emailed them directly to see if they can be of any help too.

I did notice that, as far as customizing the functions with the original switch. So I’m thinking I can hook up the original and make my changes then swap the switch out with the new. I’m hoping it’s possible to wire up, I’m kinda thinking I’ll have to tap into the harness somewhere to get the dedicated wire for the front and then rear as separate but not sure if it will be as simple as that

And thank you for taking the time to help me out here, I appreciate it!

 

Ordered my Pro grille today.

 

I see what you mean. It's a toggle switch which means it sends power to the relay switch to turn the camera on individually. It will be interesting on how you would make that work. That's way above my pay grade. The anytime solution seems way too complicated for me. I chose the beat-Sonic for it's simplicity all in one plug and play solution. Yes it's a bit pricey but a whole lot cheaper than the hospital bill I would get for punching a wall trying to figure what wires go where.