What Have You Done To Your 3rd Gen Today?

blam827 · Jan 18, 2019

2017tacomaSport said: ↑

Has anyone installed the redline tuning Hood struts and if so is there a specific rivet gun that you would recommend preferably from the Home Depot?
Click to expand...

Nope. Any decent rivet gun will work. Just don’t drill too far and hit the under side of the hood

blam827 · Jan 18, 2019

Easthill Bob said: ↑

Here's hoping you make it to the end of the road this time!
Click to expand...

Thanks. I’m a different person than I was 25 years ago. We all are I suppose. Just enjoying what’s in front of me

gtdad66 · Jan 18, 2019

I added a Corsa cat back on the 2017......

2017tacomaSport · Jan 18, 2019

Easthill Bob said: ↑

Any good quality rivet gun will work. I used a long handled one from Harbour Freight on one side and then my Matco on the other for comparison...., both worked fine although the Harbour Freight one was a little long for this application. Buy a good name brand gun and you should be fine. You might want to pad any painted surfaces. Those steel rivets are tough and once the stem on the rivet breaks the gun tends to jump almost uncontrollably in whatever direction the torque was applied. After installing your first rivet you will see exactly what I'm talking about. A doubled up hand or bath towel hung from the engine compartment over the side of your fender might be a good idea at least for the first rivet. Fairly simple mod and you will be very happy with the end result.
Click to expand...

Thanks for the tips

dmo1028 · Jan 18, 2019

Received and installed my Pro Grill that I received from @FreshMexicanTaco
Everything was packaged well and looked flawless! Pretty easy install but getting the clips for the existing grill undone was frustrating...broke a few just to make myself feel better!!

Ruminator · Jan 18, 2019

Weekend's here. Snow's comin'. Drive safe out there, and remember...

R4MBLN_YOTA · Jan 18, 2019

New custom front and rear bumpers fabricated by a guy locally and custom weld on sliders made by a buddy of mine.

blam827 · Jan 18, 2019

Easthill Bob said: ↑

Anyone can make a mistake, the trick is to not keep making the same ones.
Wishing you luck and happiness!
Any new mods lately?
Click to expand...

Just got my 2019 DCSB Sport 4x4 Tuesday. Get to start all over ! Wheels and tires next Tuesday

TT005 · Jan 18, 2019

Installed Swirl TPO BumerShellz by @eCOOL1. Next up, black overlays or get rid of the chrome “V6” and “Tacoma” emblems.

greg8765 · Jan 18, 2019

D.indi said: ↑

Backlit homelink mirror. My garage doors open 6hp faster now, but in all seriousness if you have the autodim mirror it’s a 5 minute job and the convenience is certainly in the dollars.

Click to expand...

want... how much and where did you buy it?

jamesfishn09 · Jan 18, 2019

Leer XR, Baja Amber Fog/Cornering Lights, Cali 32" Light Lower LED, LED Interior and some exterior, Black Tip, Pop & Lock Tailgate, Redline Quicklift Elite Hood Shocks, OCD Glove and Console, TRD Pro Front Skid, Blackout tailgate and side chrome, waiting on Black Grill Moulding ($105.00 shipped)-not wanting Pro Grill, just lose the chrome, Radio Knobs from Tacowiede (TW Member) Huge THUMBS UP, Billet ABS Guards, Bed Mat.
To do's: add 20% or so to front windows, decide on some extra lighting options for the shell. Not sure about sliders, looking seriously at the BAMF's just need to narrow down specifics on degrees, PC or no, no rush on wheels-not lifting. Would like to put a flush LED work light in rear bumper, need to see a good option first and haven't yet for 3rd gens.
Would love to get a rod vault if I could find a decent used one. $400+ new is pretty insane.

gwynn1975 · Jan 18, 2019

Didn’t really like how my 19x contrasted with the interior, so I went out and bought a Glock 45 today

Daddy_Firebird · Jan 18, 2019

jamesfishn09 said: ↑

Leer XR, Baja Amber Fog/Cornering Lights, Cali 32" Light Lower LED, LED Interior and some exterior, Black Tip, Pop & Lock Tailgate, Redline Quicklift Elite Hood Shocks, OCD Glove and Console, TRD Pro Front Skid, Blackout tailgate and side chrome, waiting on Black Grill Moulding ($105.00 shipped)-not wanting Pro Grill, just lose the chrome, Radio Knobs from Tacowiede (TW Member) Huge THUMBS UP, Billet ABS Guards, Bed Mat.
To do's: add 20% or so to front windows, decide on some extra lighting options for the shell. Not sure about sliders, looking seriously at the BAMF's just need to narrow down specifics on degrees, PC or no, no rush on wheels-not lifting. Would like to put a flush LED work light in rear bumper, need to see a good option first and haven't yet for 3rd gens.
Would love to get a rod vault if I could find a decent used one. $400+ new is pretty insane.
Click to expand...

Welcome to TW! Busy day of mods to say the least.

Matusik1 · Jan 18, 2019

Decided to hook this dashcam up on the GoPro mount. Super easy to do and works great!

EagleUSMCRet · Jan 18, 2019

Easthill Bob said: ↑

Any good quality rivet gun will work. I used a long handled one from Harbour Freight on one side and then my Matco on the other for comparison...., both worked fine although the Harbour Freight one was a little long for this application. Buy a good name brand gun and you should be fine. You might want to pad any painted surfaces. Those steel rivets are tough and once the stem on the rivet breaks the gun tends to jump almost uncontrollably in whatever direction the torque was applied. After installing your first rivet you will see exactly what I'm talking about. A doubled up hand or bath towel hung from the engine compartment over the side of your fender might be a good idea at least for the first rivet. Fairly simple mod and you will be very happy with the end result.
Click to expand...

Solid advice here... the steel rivets were an s.o.b. for me and my pop rivet gun... I dont have huge forearms but I could have used a gun with larger/ more leverage handles. Easy and very useful mod... measure twice drill once... use a drill stop or tape the drill bit.

R4MBLN_YOTA · Jan 18, 2019

blam827 said: ↑

Just got my 2019 DCSB Sport 4x4 Tuesday. Get to start all over ! Wheels and tires next Tuesday
Click to expand...

Nice! Ya licked the best color for sure

Idahobushpilot · Jan 18, 2019

gwynn1975 said: ↑

Added some Maxpedition goodies to the transmission hump

Click to expand...

Are these velcroed to the carpet ?

gwynn1975 · Jan 18, 2019

Idahobushpilot said: ↑

Are these velcroed to the carpet ?
Click to expand...

Yes they are. They are both from Maxpedition. A few pages ago I posted a link for them

Casinater · Jan 18, 2019

Matusik1 said: ↑

Decided to hook this dashcam up on the GoPro mount. Super easy to do and works great!

Click to expand...

Which camera and mount is this? Im really really wanting to do this! Thanks!

Daddy_Firebird · Jan 18, 2019

R4MBLN_YOTA said: ↑

Nice! Ya licked the best color for sure
Click to expand...

Um.. licked? Im sure that line has been said multiple times in a adult entertainment video but I would venture to say that’s the first time that has been said on a TW forum. Lol

Log in or Sign up

Welcome to Tacoma World!

What Have You Done To Your 3rd Gen Today?

#110301
blam827 Well-Known Member

#110302
blam827 Well-Known Member

#110303
gtdad66 Well-Known Member

#110304
2017tacomaSport Well-Known Member

#110305
dmo1028 Well-Known Member

#110306
Ruminator Chairman of the Bored

#110307
R4MBLN_YOTA #SENDIT

#110308
blam827 Well-Known Member

#110309
TT005 Well-Known Member

#110310
greg8765 Grant

#110311
jamesfishn09 Well-Known Member

#110312
gwynn1975 Well-Known Member

#110313
Daddy_Firebird Well-Known Member

#110314
Matusik1 Active Member

#110315
EagleUSMCRet Well-Known Member

#110316
R4MBLN_YOTA #SENDIT

#110317
Idahobushpilot Member

#110318
gwynn1975 Well-Known Member

#110319
Casinater Well-Known Member

#110320
Daddy_Firebird Well-Known Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

What Have You Done To Your 3rd Gen Today?

#110301 blam827 Well-Known Member

#110302 blam827 Well-Known Member

#110303 gtdad66 Well-Known Member

#110304 2017tacomaSport Well-Known Member

#110305 dmo1028 Well-Known Member

#110306 Ruminator Chairman of the Bored

#110307 R4MBLN_YOTA #SENDIT

#110308 blam827 Well-Known Member

#110309 TT005 Well-Known Member

#110310 greg8765 Grant

#110311 jamesfishn09 Well-Known Member

#110312 gwynn1975 Well-Known Member

#110313 Daddy_Firebird Well-Known Member

#110314 Matusik1 Active Member

#110315 EagleUSMCRet Well-Known Member

#110316 R4MBLN_YOTA #SENDIT

#110317 Idahobushpilot Member

#110318 gwynn1975 Well-Known Member

#110319 Casinater Well-Known Member

#110320 Daddy_Firebird Well-Known Member

Products Discussed in Entire Site Forum: 3rd Gen. Tacomas (2016-2023) Thread: What Have You Done To Your 3rd Gen Today?

#110301
blam827 Well-Known Member

#110302
blam827 Well-Known Member

#110303
gtdad66 Well-Known Member

#110304
2017tacomaSport Well-Known Member

#110305
dmo1028 Well-Known Member

#110306
Ruminator Chairman of the Bored

#110307
R4MBLN_YOTA #SENDIT

#110308
blam827 Well-Known Member

#110309
TT005 Well-Known Member

#110310
greg8765 Grant

#110311
jamesfishn09 Well-Known Member

#110312
gwynn1975 Well-Known Member

#110313
Daddy_Firebird Well-Known Member

#110314
Matusik1 Active Member

#110315
EagleUSMCRet Well-Known Member

#110316
R4MBLN_YOTA #SENDIT

#110317
Idahobushpilot Member

#110318
gwynn1975 Well-Known Member

#110319
Casinater Well-Known Member

#110320
Daddy_Firebird Well-Known Member

Products Discussed in