1st Gen Lunchtable Thread - General Discussion

If it was in the budget, yep. Can't justify it right now.

 

Rather go 5th gen if I had the money

 

4runner will suit his needs better.. guy really doesn't need a truck. which is why i was confused he said ranger... but then i remember he despises the explorer because of his last one

 

Head two electric boogaloo



Had to clean that little water spot up

 

Found another socket on the PSD. Not sure the PO had any business working on a vehicle. Not sure how he fucked up the y pipe so bad either

 

It's seems a lot of the diesel folks are either old folks that bodge stuff together or bros that want their truck like their pre workout full of engergy and damn the consequences.

 

Well. My uncles buying a new sr5 4runner and a 2007 corolla...

 

Yup this dude was late 40s-early 50s and seems to have hacked it together enough to sell to me. Not sure WTF he did. I do know he left the turbo pedestal unbolted because he couldn't get the turbo to line up proper. Now I have to figure out WTF he did to create 3/8" misalignment between the two

Truck has 2 fuel filters and one was Motorcraft and one was Napa (they are sold together and you change both on the same interval) so I don't know if he was just a moron or what

 

I mean I knew it needed some work but I didn't realize that it was gonna be a total cluster fuck

 

How do I adjust my headlights on the 04? put new bulbs in a holy asscrackers they're way off. Of course the old bulbs weren't clipped in, so they didn't look take off..

 

Ok, found the write up. Now I have to find a 4.5 mm socket. I should 500 of those that never got used...

 

Should be 4mm not 4.5mm. My OEM & aftermarket HLs were all 4mm.

 

take notice - its a bitch to get in there with any normal sized hand. If you have one of those little 1/4 drive ratchets with the flex head on it, that helps.

 

Great...I wear xl gloves. This will suck..lol. guess I'm headed out to buy some tools tomorrow..I can always use tools

 

@Sperrunner @Crodell6


3 chili cheese dog, 3 corn dog 3 fries lol

 

I wear large. I don't have small hands but I'm able to adjust them fine. I've done it so many times. Easier way is to just get the 1/4" socket & ratchet on then use your fingers on the end of the ratchet handle to turn. Really no need to stick your hand all they way down in there. Turn left (loosen) to go down, right (tighten) to go up.

 

I have fat palms and short fingers...gloves never fit me perfectly. Spatula hands they call me

 

Great for face palms!

 

HF FTW