BP51 Lift what extras do I need?

Hello all, just bough a 2019 TRD offroad. I have decided on the OME BP51 lift with Camburg UCA, and I'm wondering what else I need. I have decided to do the ECGS bushing when the lift is installed, but do I need extended brake lines or extended bump stops? Is there anything else I'm missing?

 

What size tires are you going to run?

 

285/70 17

 

Your gonna need CMC. Depending who is doing it you may need to buy plates

 

I'm hoping I can avoid that with 17"x8.5" rims with 4.75" backspace

 

Check out the overlanders on youtube for all the gear you will 'need', only the most expensive.

Need is subjective. Some people need a cmc and others don't even with the same size tires. Some people need a Diff drop or CB drop and others don't. Some need axle shims and others don't..

 

Lifting the rear?

 

Nah, depending on the OPs location all the cool kids leave the rear or lower it..

 

I have ome bp51 lift on a 2015 so I can only speak for that. But I only have minor rubbing on the cab mount. (cleans the dirt off the cab mount) im running 255/85r16
We spent 2 weeks in Moab area riding trails we had zero problems. I bought extended brake lines but there was so much play in the stock ones we decided not to replace them. We did have to remove the stock front mud flaps and trim some plastic.
Hope that helps.
Good luck

 

Yes the kit comes with Dakar rear leafs

 

Legit! Extended brake lines front and rear?

 

Also consider upgrading your bump stops while doing the suspension work. Ubolt flip kits are nice as well.